8" (frame outer diameter 205mm) 4Ω/Max 100W speaker unit.
A powerful non-press cone woofer unit with a large diameter of 8 inches (21 cm) in diameter.
This 8 inch 8 ohm MAX120 watt non-press cone woofer unit is a little smaller in diameter.
The difference between this unit is magnet size, outer diameter size, and edge material, so the 120W type is higher in specs.
The eyes of the resin coated non-press cones are the same, and this is a very good unit that can be said to be a high cost performance when considering the balance between sound quality and price.
Unbelievable high quality units are now available!!!
Adopts a non-press cone that is ideal for low-frequency playback with a moderate internal loss due to its thickness and light weight.
The resin coating on the surface reduces the peak of the high frequency side that is inevitable by pulp cones, giving it a natural and superior sound quality.
Non-press cones are an excellent material for low frequency playback, but are only used in high quality models from cost and technical, making this item difficult to find on its own unit.
Not named but made as a Nordic luxury brand speaker unit and is a rare item that is usually not distributed to the market.
This time is a spot product with a small amount of stock, and it will end once it is gone, and there is no future stock. Please consider this opportunity!
We recommend this masterpiece.
[Precautions]
There are gaskets on the back of the unit but because of the storage product, the adhesive is sweet, making it easy to fall off, and some may have a falling off. Please acknowledge
Please be aware that this product is brand new, but there may be some stains or minor scratches as it is imported.
This product is sold individually. Please note that these are not sold in pairs.
※Although we do not offer a warranty, we will replace it if you can check any injuries or fatal damage at the time of receiving the product.
Product Specifications:
Unit of measure : 1 piece
Format: Woofer
Diaphragm Material: Super reinforced resin coating, non-press pulp cone
Edge Material: Extra thick urethane edge
Magnet: Ferrite magnet
Impedance: 4Ω
Input (rated/max): 50W/100W
Unit diameter (cone diameter with edge): 8 inches (180 mm)
Baffle opening diameter: 7.1 inches (180 mm)
Center Cap Diameter: 2.4 inches (61 mm)
Screw hole: Thread pitch (diagonal diameter) 7.7 inches (196 mm) / Screw hole diameter approx. 0.2 inches (5 mm)
Size: Φ205mm x 82mm
Weight: Approx. 28.1 oz (805