Feature(may vary by option.)
●Size (W x D x H): 25.8 x 15.7 x 5.9 inches (655 x 400 x 150 mm); Weight: Approx. 7.7 lbs (3
●Top plate size: Width 19.7 x Depth 9.4 x Height 0.5 inches (500 x 240 x 12 mm)
●Load Capacity: 11.0 lbs (5 kg) (static load)
●[Clamp mountable thickness] 0.4 - 1.4 inches (10 - 35 mm), Depth: 1.6 inches (40 mm) or more
●Top Plate Lifting Range: Approx. 3.1 inches (80 mm)
●Material: Iron, particle board
●Set Contents: Top plate, sliding rails with clamps, 2 lift arms, 2 wire fasteners, center pipe, 4 small screws, 4 large screws, 2 bolts, 2 washers, hex wrench, Japanese instruction manual (English language not guaranteed)
●[Warranty period] 12 months from date of purchase
[L]
Description
A post-mounted clamp type keyboard slider that is the same height as a desk
This is an aftermarket keyboard slider that can be used widely on your desk.
You dont have to put the keyboard on your desk so you can use the space more effectively.
Lift the top plate to lay flat to your desk for extra space
Slide under the desk when not in use and it wont get in the way.
Keyboard slider with a top plate
If you want to use a little more space on your office desk, why not put your keyboard in another place?
【Clamp-On Keyboard Slider S】 allows you to add a sliding top plate to your desk with the clamp.
The top plate is raised to the same height as a desk, allowing you to use the desk more widely.
A new aftermarket type that allows you to use a wide range of surfaces.
【Clamp-On Keyboard Slider S】 can be attached to your desk with a clamp.
Clamp-type, so it is easy to remove and move.
Full keyboard can be installed, can store laptop computers.
Holds full-size keyboard.
It can also be used to hold your mouse on a compact type of keyboard.
It can also be used as a laptop compartment.
◆Keyboard height can be adjusted.
You can adjust the position of the keyboard within 8cm range.
You can place the keyboard low to keep it in proper posture or high position for extra room on your knee.
◆About the installation locations:
If there are obstacles or skeletons that are over 2.0 inches (5 cm) wide including the top board, the sliding part may be interfered and cannot be installed properly.
Please check the size of the desk you plan to install before purchasing.
NOTE---------------------------------
Other than the listed items are not included.
This product requires simple assembly.
If there are horizontal posts on the back of the desk top, the clamp may interfere with the clamp. When installing this product, please adjust the position of the clamp so that the rail does not hit it.
Please be careful not to get your hands stuck in the gap between the top plate and the desk.
Do not apply loads such as applying force to the top plate.
Please do not place objects over 11.0 lbs (5 kg).