Feature

●This is a set of 1 Hall Effect Stick Module for Astro C40 TR Controller
●Innovative Hall Effect Technology: Magnetic Hall Effect Technology eliminates Joystick drift problems. If the left and right stick failure occurs, you can replace it to improve it
●Use the included screwdriver to remove the base module and replace the stick module. Plastic housing and stick levers flush the existing people
●Reset must be required after installation. Resetting method: Rotate the left stick 3 times at the same time, hold the reset button to the left (counterclockwise) and hold the right stick 3 times at the same time, and hold the reset button to vibrate, then hold and hold it again, then shake to complete the reset
●Warranty is 1 month from date of order. Installation Notes: 1: Before installation, please clean the contact point of the circuit board module and the C40 controller. There may be cases where the contact poor contact caused by small dust may cause the stick to operate or drifting. 2): Tightening the screws on the faceplate (right up => bottom left => lower right => upper left sequence), too tightening the screws may cause the stick to work. 3): You can also replace the left and right modules. If you have any questions: please contact support@epindon.com


Description

Package includes:
C40 TR Hole Effect Stick Module x 1 (Base part only)
T6 screwdriver x 1