[White]
[YELLOW]
PREMIUM QUALITY EYE WASH STATION:
Easy installation is required for glasses magnets. Placement should be in the zone of handling harmful substances and materials. The area should be obvious to obstacles to facilitate a sudden drop or wash off after an accident.
Suitable for emergency applications in a variety of public places, industrial, laboratories, factories and other places.
Important Parameters:
Shower Valve: 32mm(1")
Material: 304 thick stainless steel
Light source type: 12L/min
Working Pressure: 0.25-0.45MPa.
Applicable conditions: Always hot or water that meets hygiene standards.
How to install:
1. The installation location can be affected within 10 seconds of driving speed within 15 meters of places where accidents are prone to occur.
Places to wash
2. Wrap the seal tape at each part and connect the water pipe.
3. After connecting the inlet pipe and outlet pipe, check whether the ball valve switch is flexible and suitable for it to be clogged or not.
Instructions:
1. Open the water inlet control valve before use.
2. To clean your eyes, press the push plate on the glasses switch clockwise to open the eyeglass valve, pull the push plate back in the direction of the needle and close the diagonal valve.