Feature
●【WIDE COMPATIBILITY】This mounting plate features a Vixen style dovetail on the base to fit standard Vixen style saddles manufactured by various brands
●【Multiple Mounting Points】Three 2.74" (69.5mm) slots are designed for mounting balancing equipment. 0.25" (6.4 mm) wide slot accommodates M6 and 1/4" screws. Also, each slot has two 3/8" screw holes (M8 countersunk holes) and a 1.4" (35mm) spacing between each hole in the same slot and 2.52" (64mm) spacing between the two adjacent slots
●【12 Pairs of 0.25"/6.4mm Countersunk Holes】There are 24 holes in total, 0.79"/20mm spacing between each hole of the same slot, and between the two adjacent slots, there are 1.57"/40mm spacing. There are two 1/4" screw holes on the back and a 1/4" screw can be attached to a variety of stands
●【Precise Graduations】There are markers on both sides, so you can find the exact position of your device for astrophotography, astronomical observation, night sky observation, and astronomical observation
●【Anti-slip Rubber Pad】Soft non-slip rubber pads increase the stability between the mounting plate and the device, protect your device from unwanted scratches. Four safety screws on the bottom prevent the mounting plate from falling out. (Note: For saddles that do not support falling during loading, you will need to remove two safety stop screws. )
Description
