Feature(may vary by option.)
●Thickness = 0.3 inch (8 mm)
●Thread part = Coarse [Pitch: Approx. 0.05 inch (1.25 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items
[M12]
Description
■ Shape: Flanged Hex Nut
Hex nut on one side with a seat larger than two sides
The seat surface has a large amount of tightening strength and prevents loosening.
Use a tool such as a spanner or wrench to tighten it.
■ Thread Shape: Coarse
It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.
■Material: Iron (S45C, hardened)
It is a high carbon steel called carbon steel for mechanical structures. This steel material is "hardened (heating and cooling) to increase its hardness, and it improves mechanical properties such as tensile strength and strength over normal S45C.
■Surface treatment: fabric
Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.
Product Features:
Single piece nut with seating surface.
The seat side screws are cut and skirt processed.
● Prevents "loosening" from external forces at right angle to the axis.
Prevents "loosening" caused by vibration external forces and rapid repetitive stops at the axis.
To the axis, it prevents "loosening" caused by the bolt tilting with external forces placed on the side.
Prevents "loosening" due to non-rotation.
Prevents "loosening" that lasts over and over again.