Feature

●Shaft Diameter: 0.25 inches (6.35 mm)
●Set Contents: [Single head screwdriver bit with steps: 0.25 inch (6.35 mm) square: 3.9 inch (100 mm) (+) No.2 x (+) No.2/65 mm (+) No.2 x (-) 0.25 inch (85 mm) (0.39 inch (10 mm), [HSS steel titanium coated hexagonal drill blade. 0, 2.5 , 3.0, 3.5mm
●Compatible with 14.4 V *Drill blades cannot be used
●Note 1: Before use, please inspect the set contents and check if there are any abnormalities such as deformation or cracking. For various bits and socket bits, please use one that matches the size of screws, bolts, and nuts. Do not strike it with a hammer or something similar to impact. When using with an impact screwdriver, the drill may damage the shaft, so please be sure to avoid any impact
●Note 2: The drill blade is for use with iron steel, wood, light alloy, and synthetic resin. Do not use on non-intended or heat treated steel materials. Also, do not touch the blade with bare hands. Please be careful that the drill blade from 0.08 to 0.1 inch (2.0 to 3.0 mm) will break easily if pressed hard. The drill blade or bit immediately after operation may become very hot, so please be careful of burns
●Note 3: Do not use on circuit with current flow. After using, avoid dust and moisture and keep it clean
●Material: Bit: Taiwan S2 + anodized aluminum (coloring part); Socket Bit: CR-V (nickel plating); Drill Blade: HSS steel (titanium coating); Holder: PE
●Country of Origin: China


Description

Slim tip, easy to see screw holes.
Tiered bits are suitable for work in narrow spaces.
Coloring for easy identification
Coloring for easy size identification.



From the Manufacturer



Kiryu GTBSD-10 Titanium Drill Color Bit Socket Set, Set of 10

Slim tip, easy to see screw holes.

Step bits for work in narrow spaces.

Comes with coloring that allows you to see it at a glance.

A set that is frequently used

Kiryu GTBSD-10 Titanium Drill Color Bit Socket Set, 10 Piece Set

Driver Bits

Single head screwdriver bit with steps: 0.25 inches (6.35 mm) square: 3.9 inches (100 mm) (+) No. 2

Tip Slim Double Head Driver Bit 0.25 inches (6.35 mm) Angle: 3.3 inches (85 mm) (+) No.2 x (+) No.2 / 2.6 inches (65 mm) (+) No.2 x (-) 0.24 inches (6 mm)

Socket Bit

8mm, 10mm, 12mm

Drill Blade

HSS Steel Titanium Coated Hex Shaft Drill Blades: 0.08 inch (2.0 mm), 0.1 inch (2.5 mm), 0.1 inch (3.0 mm), 0.1 inch (3.5 mm)