Feature

●We make a transmitter and receiver that works together when you get it, test it before we ship it, just install it and do not need anything
●Wireless remote control switch can control one or more devices in the room. Widely used in motors, electric actuator, remote control water pump switch, electric curtain machinery, wireless remote control machine switch, wireless remote control socket, elevator, wireless lamp and lantern, windows, entrance door, garage door, various kinds of wireless home appliance control etc
●Standby Flow: About 10mA; Working flow: About 35mA; Maximum load current: less than 10A (less than 60 watts of equipment)
●Operating voltage: DC 9V to 12V; Working frequency: 315mhz
●If you have any problems during use,please feel free to contact us,we will be happy to serve you and thank you very much


Description

Operating Voltage: DC 9V-12V
Standby Current: 10mA
Operating current: 35mA
Max load current: less than 10A (equipment less than 60 watts)
Operating frequency: 315mhz
Size: 10*4.5*3cm
Reception sensitivity: -105dBm
Function: Limit & Wire External Button
The original state is off (suddenly it runs out of power, but it came back again. The state is still off. Need to turn on manually)
Working Mode: Momentary / Latch. (Adjusted by the jumper of the receiver) (If you need to use Momentary to change the jumper of the receiver, it will ship as a latch by default)
Moments---"1 & 2" pin jumper
Latch---"2 & 3" pin jumper
Moment ---Press the button "up" to move the motor forward, release to stop Press the button "down" to turn the motor backwards and release to stop
Latch---Press the button "up" to move the motor forward, press the button "stop" to stop Press the button "down" to turn the motor back and press the button "stop" to stop
If the receiver output status is "latch", it has a 0.5 second delay time for forward and reverse turn. This is a protective product.
We test the transmitter and receiver to work in conjunction with them before shipping. When you get it, there is no need to do anything, just install it.

CODE LEARNING:
1. Press the learn button on the receiver once to turn on the learning indicator Next, press the button on the transmitter once (first button is default, forward), the learning indicator flashes 3 times to turn on. This means the first button is learning. Successfully
2.Then press the button on the transmitter once (second button is default for reverse). Learning indicator flashes 3 times and lights up. It means that learning the second button is successful.
3. Next, press the transmitter stop button once (if you stop, the third button is default). Learning indicator flashes 3 times and lights up. This means learning the third button has been successful.
4. Press the button on the transmitter once again. Learning indicator blinks 3 times and turns off. This means every button has been learned successfully.

Clear code: press the learn button on the receiver for 5 seconds. Learning indicator blinks 3 times and turns off. This means all transmitter codes in the receiver have been cleared.

Package: 1 x Receiver + 2 x Transmitter ( Limited Switch and other accessories are not included)