Feature

●Wheel Hub Axis Deflection Prevention Washer Tightens all around the hub axis with even pressure for increased rigidity. One manufacturer tests know that when you tighten the hubs quick release, the hub axis will be nearly three times
●The biggest cause is that there are gaps in the fork and frame ends, so it cannot be tightened with even pressure throughout the hub axis. The hub axis sagging, which has a negative impact on the hubs rotation
●This washer can fill the gaps with the protrusion and tighten it with even pressure throughout the hub axis. (Patented) The same strength as the rigidity of the thru axle hub
●Washers also have a surface treatment called QPQ processing, which is rust resistant. Does not "rust" so please routine maintenance
●The washer has a good effect of preventing hub-axis sagging and improving the hubs rotation, but when you actually ride it, it feels like the stiffness of the front fork and frame. The front fork makes it noticeable. Some cases have tried a half faith and bought a few pairs without questions. Especially soft fork ends


Description

Wheel Hub Axis Deflection Prevention Washer Tightens all around the hub axis with even pressure for increased rigidity.
Compatible ends: Front 0.2 inch (6 mm) / Back 0.2 inch (6 mm) / Front 0.2 inch (7 mm) / Back 0.2 inch (5
By tightening the hubs quick release, the hub axis may bend nearly 3 degrees.
The biggest cause is that there are gaps in the fork and frame ends, so it cannot be tightened with even pressure throughout the hub axis.
The hub axis sagging, which has a negative impact on the rotation of the hub.