1 inch (24mm) 8Ω/MAX30W silk dome tweeter unit.
We also have a high quality tweeter unit!
You can hear it and hear it sounds. This is a unit that you can see clearly.
Due to the sound is good, if the sound source is poor, it may become noticeable.
This is a highly recommended masterpiece even if you are subdued to a subdued statement!!! Get yours today!
In addition to the sound good, the 4-hole resin bezel (faceplate) is attached to make it easy to install.
This is a great tweeter unit.
This is a high quality ferrofluid tweeter unit with a magnetic fluid enclosed in the voile coil gap.
Uses a ferrofluid system that infuses magnetic fluids into the gap between the voice coil and the magnet, so it is compatible with large inputs, and it greatly reduces secondary and terrical distortion.
This is a quality tweeter you wont find anywhere else!
This is a relatively expensive unit in our units, but is usually not available at such prices.
When considering the specifications of the unit, the cost performance is very high.
This time is still on the spot, and when it is gone.
Please consider this opportunity! We recommend this masterpiece!
[Precautions]
Please make sure to cut the tweeter unit with a condenser or other low range.
Please be aware that this product is brand new, but there may be some stains or minor scratches as it is imported.
This product is sold individually. Please note that these are not sold in pairs.
※Although we do not offer a warranty, we will replace it if you can check any injuries or fatal damage at the time of receiving the product.
Please be aware that we will not be able to deal with defects after processing.
There may be some glue protrusions, but there may be slight differences in appearance depending on individual items. Please acknowledge
Product Specifications:
Unit of measure : 1 piece
Format:Tweeter
Diaphragm Material: Silk Dome
Magnet: Neodymium magnet (anti-magnetic specification).
Impedance: 8Ω
Input (rated/max): 15W/30W
Unit diameter (cone diameter with edge): 1" (24mm)
Baffle opening diameter: 1.4 inches (35 mm)
Screw hole: Thread pitch (diagonal diameter) 1.7 inches (43 mm) / Screw hole diameter approx. 0.1 inches (3.7 mm)
Size: Diameter approx. 2.0 x 0.5 inches (50 x 12 mm) (excluding protrusion
Weight: Approx. 1.1 oz (30