NISSIN horizontal semi radial master features a more direct operation experience than a horizontal master cylinder.
By using a small hydraulic ratio, the lever Ratio is set larger, the direct feel of the radial type is as close as possible.
Due to its structure, it is recommended for vehicles that cannot be installed with radial type master cylinders.
In addition to the standard stay, the special aluminum tank stays are also included to prevent the fluid tank from being diagonally when installing the Naked Model.
Comes with 6 lever position adjuster dial Improves the operation of the front brake.
φ19 corresponds to a 5/8" horizontal master cylinder.
[Compatible Dimensions]
CB1300SF (98-02) CB1100F (83) CB1100R (81-83) CBR1000F (87-88) VF1000F (84-85) VF1000R (84) CBX1000 CBR90RR (92-92-92-92-900000R) 9) CB90 0F (78-82) RVF750 (95-99) VFR750R (87) VFR750F (86-87) VF750F (83) CBR750F (88) CBX750F (83-84) CB750FC (82) CB79F -81) CB. 750K (77) Hornet 600 (98-00) CBR600F4 (02) CBR600F (99-) CBX550F (82) CB400SF (08-14) CB400SF (99-07) CB400SF (97-98) NS4 00R (8) 4-85) CBR400F (83-85) VF400F Integra (84) CB400T Superhawk III (78-81) NS250 (84-85) CB250 Superhawk (80-81) VT250 (85) VT250 (82-82-82-82-82-82 3) XJR 1300 (98-99) XJR1200 (94-97) VMAX (90-00) GTS1000 (96-99) FZR1000 (87-95) TRX850 (95-00) TDM850 (92-00) YZF75 0R (93 -97) FZR750R FZR750 (87-88) FZ750 (85-86) FZX750 (86-00) TX650 (73) SRX600 (86) RZV500 (84-87) FZ400 (97-9) FZR4 00RR ( 90-99) FZR400 (86-89) FZ400 (84-89) XJR400 (93-00) XJ400 (83) SRX400 YSP Specs (86) Grand Majesty 400 (05-08) 〈5RU〉 RZ350 (8) 1-84) FZR250R (89-99) FZ250 Feather (85-86) R1-Z (90-99) TZR250 (89-99) RZ250R (83-90) GSX1400 (01-08) GSX-1300R Hammer (08GS15) X-1300 R Hayaba (99-07) Bandit 1200(00-06) Inazuma 1200 (96-00) GSF1200 (95-00) GSX-R1100 (93-99) GSX-1100R (86-88) GSX10S (81-999 SV100 0 (03) TL1000R (98-00) RF900R (91-00) GSX750F (99-) GSX-R750 (96-00) GSX-R750 (94-95) GSX-750R (85-87) GSX750SIII (86-86-86-86-86-87) 7) GSX7 50S (82-85) SV650 (99-) impulse 400 (99-)SV400S (00-01) Inazuma 400 (97-00) Bandit 400 (89-99) GSR400 (06-07) GSX400S (92-0S (9) 94) GSX- R400R (90-99) GSX-R400 (88-89) GSX400FJ (88-89) GSX400FS Impulse (82) GSX-R250R (89) RGV-250 Gamma (88-95) RG250 Gamma (83-84KZ) 1300 (79-89) ZX12R (00-02) ZRX1200 (01-08) ZZR1200 (02-05) ZRX1100 (97-00) GPZ1100 (95-00) ZZ-R110 (90-01) Zephypher 1) (92-06) Z1100 (84) GPZ1100 (83-84) Z1100GP (81-82) ZX-10 (88-90) GPZ1000RX (86-87) ZL1000 (86-87) Z1000 (81-83) Z1000 MKII (79-80) Z1 (78-79) Z1000 (77-78) ZX-9R (98-00) ZX-9R (95-97) GPZ900R (84-01) Eliminator 900 (85) Z900 (76) ZR-7 (9 9-05) ZX-7 (96-00) ZXR750 (89-95) Zephyr 750 (90-06) GPX750R (86) GPZ750R (84-86) Eliminator 750 (85) GPZ750 (83-85) Z750GP (82) Z750FX (79-81) Z750Four (76-77) ZX-6R (98-00) ZX-6R (95-97) ZZ-R600 (90-00) GPZ600R (85) 650RS W3 (73) ZZ-R400 (90-05) ZRX400 (94-05) Zephyr 400 (97-08) Zephyr 400 (89-95) ZXR400 (89-90) KR-1 (89-90)
Precautions for Use:
For use with φ22.2 steering wheels. Not for use with inch bar handles.
Because the banjo bolt mounting position is on the bottom side, brake hose may be required.
Depending on the combination of your caliper, there is a lever adjuster position that cannot be used on the grip before the brake fluid pressure occurs. Adjust the lever adjuster, use the lever adjuster position where the brake is fully effective and the lever does not touch the grip.
Do not use silicone DOT5 (BF5) brake fluid.
The ABS function may not work properly, so it cannot be installed.
Please check the product specifications on the manufacturers HP before purchasing.
Banjo bolts (10 x P1.25) sold separately.
Compatible with horizontal 5/8 in. Cannot be used on other sizes.
Brake hose outlet direction and angle are the same as the horizontal master.
Even with the same piston diameter as normal, the brake touch may differ due to different lever ratio.
Designed to be used with multiple vehicles. Some vehicles have a lever position that touches the screen or cowl when the handle is moved left or right. The position of the master cylinder (clutch holder) may be improved, but if it does not improve, please stop using the lever position that touches it.
Depending on the vehicle, the control switch may be interfered. Please adjust the lever position and discontinue using the lever position that touches it.
When installed on a radial brake master, the aluminum cutting adjustment lever is shorter than the original lever.
Do not use silicone brake fluids