For cutting and clamping (crimping) wire ropes with a diameter of 0.004 to 0.09 inches (0.1 to 2.2 mm).

Compared to the previous (WX-250), it has been improved with the ratchet function and ratchet lock release, making it easier to use.Essential tool for wire rigging for large blue objects such as deep sea big, trolling, and extra thick nylon rigging.

Crimping Capacity: 0.004 - 0.02 inches (0.1 - 0.5 mm), 0.02 - 0.04 inches (0.5 - 1.0 mm), 0.08 inches (1.0 - 2.0 mm), 0.09 inches (2.2 mm); Product Length: 6.7 inches (170 mm); Weight: 9 oz (2 oz (270 g); Uses: Wire crimp compatible sleep; Suitable for: 8 oz (270 g).Compatible Sleeve Sizes: 2N, 3N, 4N, 5N (Nylon No. 20 to 200); Wire Cutting Support: Up to 0.08 inch (2.2 mm); Uses: Fishing wire rigging, hanging shelves/frames, fixing garden trees, antennas, signs, cabinets, etc.

Features:

Toggle mechanism reduces grip strength

Convenient wire rope cutter function.

When fully crimped, it is stronger than hand winding wires.

Unique labor-saving mechanism

Equipped with a new ratchet mechanism.With optimal transmission and 30% less than traditional doubling mechanisms, you can easily fix it.The handle will not open when not crimped, preventing crimping errors.If the ratchet is disassembled, if you do not chew the sleep, you can lightly remove the lock by folding the release lever with a small nut at the base of the handle.

Crimp Size Marker

Number markers are included in each crimping hole.

The handle includes corresponding chart for each hole and wire rope diameter, making it easy to check the size and improve your work efficiency.

Compatible sleeve sizes

2N, 3N, 4N, 5N

(Nylon construction No. 20 to No. 200)

Nylon rigged for 4 sizes up to 150 and above (5N).

Energy-saving and compact

Equipped with a new ratchet mechanism, the handle is short and the small pocket size makes it convenient to carry.

EDM Cut Dice

The compression part is EDM cut to prevent sticking to the sleep, making it easy to sleep after compression.Mechanical mechanism alloy is used in the reception part for reliable and speedy crimping.

grip

TPR gripIt fits nicely in your hand and is less burden, making work smooth and smooth.

Step 1: Wire rope cutting

Wire rope cut location.Cut with wire rope cutter.

Step 2: Making a sleep ring

Run the wire to sleep.Make loops as you need.

Steps 3: Crimping

When sleep, press it vertically in the middle of the sleep, press it down.Apply pressure until the alligator is fully closed.

Step 4: Check the condition of crimping

Do two squares if necessary.

iCrimp

This is a Sabra brand that has been upgraded by IWISS based products from IWISS, which are mainly sold as a base product of pliers and benches.

The eye crimp wire cutting machine CWR has been conducted through cutting test before shipping.Please be aware that there may be cases of cutting wire debris left on the blade due to cutting test.