Feature(may vary by option.)

●Uses: Crimping Molex terminals, open barrel terminals, etc
●Material: Special alloy steel
●Surface treatment: Electropolished for deburring, wire cut and discharge processing
●Compatibility: Can be installed on SN Series crimp benches. Please note that it does not fit SN-01BM (SN Series Compression Bench). )
●Die made and custom made in accordance with international standard IEC60204-1. Please contact us for terminals that are not listed

[A28B (open parallel terminal 0.1-1.0mm²)]

[A03H (coaxial connector RG174 & RG179 & 2.5C-2V)]

[A02 (bare crimping terminal 0.25-6.0mm²)]

[A0725 (for crimp terminals with insulated coating)]

[A2549 (open parallel terminal 0.08-1.0mm²)]

[A02WF (for crimp terminals with insulated sleeves) 0.0006 - 0.09 inches (0.14 - 2.5 mm²)]

[A02WF2C (For crimp terminals with insulation coating & rod terminals with insulating sleeves) 0.02-0.1 inches (0.5-2.5 mm²)]

[A48B (open parallel terminal 0.14-1.5mm²)]

[A05B (splice terminal 0.5-1.5mm²)]

[A48BE (open parallel terminal 0.14-1.5mm²)]

[A16WF (for crimp terminals with insulated sleeves) 0.2 - 0.6 inches (6.0 - 16.0 mm²)]

[A325 (bare crimping terminal 0.75-2.5mm²)]

[A06WF (for crimp terminals with insulated sleeves) 0.01 - 0.24 inches (0.25 - 6.0 mm²)]

[A06WFL (for crimping terminals with insulated sleeves) 0.009 - 0.24 inches (0.25 - 6.0 mm²)]

[A06 (bare crimping terminal 0.5-6.0mm²)]

[A2546B (MC4 Connector | 2.5-6.0mm²)]

Description