Feature(may vary by option.)
●INARC Features: 60% duty cycle; Low power consumption, compact and easy to carry, high output; Arc welding design for easy arc welding; Equipped with overheating prevention system, overcurrent prevention system; Digital display; Plastic handle for easy carrying; Convenient quick connection system for quick, safe and stable output; Note: The above features may change without prior notice
●Technical Details: ● Operating Temperature: -10 °C to 40 °C; ● Transport and Storage: -25 °C to 55 °C; Humidity: 40 °C ≤ 50 %; 20 °C ≤ 90 %; ● Please note that air dust, acids, corrosive gas, and other substances do not exceed the standard value except for materials produced during welding. Altitude: Less than 1,000 m (1,000 m); Please do not place anything on the square side, to ensure ventilation. Wind Speed: Less than 3.3 ft (1 m)
●[Specifications] Rated Input Voltage: 100V/200V Rated Input Capacity: 5.6kVA Rated Frequency: 50Hz/60Hz Usage Rate: 60% Applicable Wire: 0.8Φ/1.0Φ ● Output Current: 50A-200A ● Package Size: 38 x 25 x 34cm ● Weight: 7.5kg
[MIG-200]
Description
What is a welding machine
Welding is a welding machine that is used for welding materials such as metals and other materials are dissolved.A welder is commonly used as an arc welder.
Welding methods such as pressure welding and brazing, but most welding on a welder is done by the melt.
Welder Type
|
|
|
|
|---|---|---|
Covering Arc WelderIt is called Hyfuku Arc Welder that uses a welding rod with a coating material called Flux over the core of the metal to generate arc discharge.Welding power supply is AC and DC type. We use a welding machine, but all work through a human hand, so we call it hand welding. The coated arc welding rod must be stored in a dedicated storage or dryer, as moisture may cause the arc discharge temperature or weaken the strength of the weld. The coated arc welding is less likely to be affected by the wind, so you can work outdoors.The machine itself is also simple in structure and is inexpensive, due to many markets. Disadvantage is that the finish may vary depending on the workers skill level and the base material is shallower than other welding machines, so it takes time to work. |
Mag WelderThe mug welder is a welder that uses a shield gas to mix inert gases such as carbonic and argon gas. The mug is an abbreviation for Metal Active Gas, which features coiled wire-like wires as an electrode. The electrode wire is attached to the supply device and is automatically supplied by the motor to the tip of the torch.The electrode wire is supplied automatically, but if a person does a welding job, it means that it is only half automatic, and sometimes called a semi-automatic welder.The shield gas used in mag welding can be carbon dioxide or mixed gasses of argon and carbonate gas, but if you use carbonated gas alone, it may be called carbonated gas arc welding or CO2 arc welding. Mag welding has a superior meltability of the base material compared to coated arc welding, which provides a good working efficiency, providing a good welding and strength, and the welding torch can be attached to a robot and automated on the production line.Often used when base material is iron. Disadvantage is that it is vulnerable to wind.When the wind speed is more than 6.6 ft (2 m), the shield gas will become a stomach in the material, so please be careful when working outdoors. |
TIG WelderA TIG welder is called a welding machine that uses tungsten as an electrode for discharge and uses inert gases such as argon or helium as shielded gas. Tungsten on the electrode does not wear out, and another welding rod is melted into the arc to weld the base material.Hand welding is done similar to coated arc welding. The TIG welder is used for joining small parts and welding thin metals such as stainless steel and aluminum, and the welding area is clean and perfect for welding small items. Features include no spark and a better look and quieter than other arc welds. Disadvantage is that argon gas needs to be prepared separately, and the welding speed is slower and more difficult than other arc welds. The TIG welder is used for joining small parts and welding thin metals such as stainless steel and aluminum, and the welding area is clean and perfect for welding small items. Features include no spark and a better look and quieter than other arc welds. Disadvantage is that argon gas needs to be prepared separately, and the welding speed is slower and more difficult than other arc welds. |
