Feature

●Product Model Number: FS-200A; Crimping Surface: 0.2 inches (5 mm); Sealing Width: 10.2 inches (260 mm); Suction Power: -80 Kpa; Product Size: Width 15.0 inches (380 mm) x Depth 5.8 inches (148 mm) x Height 2.8 inches (72 mm); Weight: 3.0 lbs (1 lbs (1 kg); Set Includes: Main unit, cleaning pins, Japanese manual (English language not guaranteed)
●Depending on the thickness of the bag, air may enter the bag. <br>Please use plastic bags with a thickness of 0.07 mm or larger to maintain vacuum condition
●Please do not remove Teflon tape on the heat wire pressure points


Description

Cylis/Sealis FS-200A Vacuum Sealer
No special bag required, fully automatic function.
Save cost and easy vacuum storage

No special bags are required, so you can achieve an overwhelming cost performance.
No need to use expensive dedicated bags, you can create vacuum bags at a fraction of the cost with commercially available nylon poly bags.

Maximum degasing power - 80 kPa for powerful suction.
Traditional vacuum sealing machines are mainstream from -50 to 60 kpa, but this product achieves a vacuum level of -80 kpa.

Change the freshness after storage due to the difference in degasing force.
The higher the degasing power, the higher the vacuum and the fresher longer.

Easy to operate by anyone with 3 touch panels
Easy to vacuum without any difficult operation.

Can be used for both dry and wet or soup.
It is compatible with a wide variety of storage options.

Maximum degasing power - 80 kPa for powerful suction.
Traditional vacuum sealing machines are mainstream from -50 to 60 kpa, but this product achieves a vacuum level of -80 kpa.

Equipped with a seal function.
The seal function allows you to only seal without any worries.
You can pack a bag of food treats, etc., and keep it delicious.

Compact design
The compact size makes it easy to store items.

Depending on the thickness of the bag, air may enter the bag.
Please use plastic bags with a thickness of 0.07 mm or larger to maintain vacuum condition.

Please do not remove Teflon tape on the heat wire pressure points