Feature(may vary by option.)

●Compatible with dedicated magnet filters
●Accessories: Holder ring with rotating mechanism, 2.8 / 3.0 / 3.2 inches (72 / 77 / 82 mm), 1 each, holder pouch

[StarScape M100]

[Circular PL M100]

[Magnet Holder M100]

Description

Product Description

The magnetic holder M100 is a special magnetic frame compatible structure, so it is easy to remove and remove gradated ND filters (GND) and ND filters with different density and types of magnetic frames.
In addition, you can attach up to 3 square filters (3.9 x 3.9 inches (100 x 100 mm), 3.9 x 5.9 inches (100 x 150 mm), and 1 C-PL filter at the same time.
In addition, the slim design of the holder itself is 0.4 inch (1 cm) thick, so you can shoot with a wide angle of 0.6 inch (16 mm) of a full-size camera without being vignetting or shaking, and the filters can be stacked together smoothly.

Accessories: Holder ring with rotating mechanism, 2.8 / 3.0 / 3.2 inches (72 / 77 / 82 mm), 1 each, holder pouch.

Awards

デジタルカメラグランプリ2020 SUMMER 周辺機器部門金賞
デジタルカメラグランプリ2021 周辺機器部門レンズ関連アクセサリー金賞

From the Manufacturer

What company is Marumi Photograiser?

Marumi Optics has been a "filter manufacturer that has consistently produced and developed camera filters for nearly 70 years since its establishment in 1952.

From Nagano to the World.

We continue to deliver the best piece of unparalleled product to customers around the world from our Nagano factory that boasts technology, wind, and water.

Innovative Magnetic Holder M100 System

Magnetic Filter SystemEasy to put on and take off. No vignetting

The structure is compatible with a dedicated magnetic frame.

You can install and replace the square graduated ND filter (GND) 150 x 150 or ND filter 100 x 100 with one touch.

It does not touch the glass directly, so it is hard to get fingerprints.

The magnetic frame makes the filter glass less likely to break even when impact is applied.

Even when square filters are stacked together, the glass surface does not interfere with each other, so it is difficult to scratch and easy to adjust.

It is an ideal item for shooting with the ever-changing scenery such as sunrise, sunset, clouds and more.

How to use square filters: For example, when attaching C-PL filters for the M100.


When using a C-PL filter (sold separately), please pre-attach it to the holder ring. Also works with Star Scape for M100. When attaching to a lens, a holder ring for the M100 is required.	Attach the holder ring to the lens.The holder ring has a double frame for C-PL operation, so please attach it with a fixed frame. If there is a protective filter, please remove it as it may cause vignetching.	Install the M100 holder from the bottom of the holder.The screws on the back of the holder (2) are pre-loosen.


The holder and holder rings are connected to the holder rings with two holder fixing screws on the back side.	Attach the square filter along the front side of the magnet attachment holder.The M100 holder can stack up to 3 square filters.	Screws help prevent slippage and slipping when two or more square filters are attached. Please note that pressing the filter surface or adding vibration may cause the filter to fall off.