Feature(may vary by option.)

●Improved cancellation function and noise reduction function: Weve improved the foundation design of conventional products and improved the stability of cancellation capabilities. In addition, it improves EMC (noise protection) of high pressure wiring and ignitors. By reducing the impact on your cars electronics than previous models, you can enjoy your in-car TV or radio without worrying about noise
●Eliminates the worry of running out of the ball warning light & a wide variety of compatible models: Many cars and luxury cars are equipped with a ball out warning light. When replacing the headlight with HID, the bulb will blink due to low power consumption. In order to prevent this, the warning canceller was traditionally purchased separately but may not fit depending on the model and year. With the built-in warning canceller kit, the special circuitry prevents malfunction to avoid blinking of the bulb warning light. It also fits a wide range of vehicles. Some vehicles may require separate parts such as relays
●Compact canceller ballast with 100% waterproof & digital control design: The warning light canceller usually needs separate parts to be put together into a compact module and is equipped with EMC (noise countermeasure) function to avoid noise failure, and smart size ballasts of 35 W / 55 W (size excluding screw holes). In addition, the inside of the ballast is infused with special waterproof silicone without any gaps, so there is no need to worry about the product breakdown due to water intrusion, so you can install it anywhere. The digital control of the microchip also automatically controls the voltage from 9V to 16V. Controls flickering and keeps brightness consistent
●(Compatible with ballasts with the same luminescence point as original): This bulb is made of quartz glass that prevents deterioration and fogging caused by UV rays, and has excellent durability. The luminous point is made to match the original bulb to ensure accurate light distribution as the original one. We have 2 types of 6,000K, which is suitable for car inspection, and 8,000K, perfect for dress up. In addition, the AC ballast + AC valve combine 100% ballast and valve performance with an average life of 2000 hours
●(Reliable initial defects and 1 year warranty) After the product arrives, we will check the operation as soon as possible. If there is a defective earlier defects, we will exchange it for free within 7 days of arrival. Even after 7 days, the HID kit with built-in belt cancellation will be 1 year warranty from the date of order. Buy with confidence knowing that we also offer new solutions such as replacement or refund. For initial defects or product defects, please attach the image of the purchase description from your order history and email to the Light Collection (you need to attach a picture to confirm your purchase history). The Light Collection also has participated in the PL insurance for the Nippon Koa Damage Insurance in case of product trouble

[6000K HB4]

Description

Product Description

To prevent warning lights. Overwhelming other companies! Uses a thin ballast!
★HID Kit, Built-in Canceller, HID Ballast, 1 Year Worry-Free Warranty.

★AC Ballast + AC Valve★
The combination of AC ballast + AC valve is used to make 100% of its performance. Average life is 2000 hours.
Separate left and right wiring reduces annoying installation work.

★ Eliminates the worry of warning lights that run out of the ball!
Many vehicles equipped with overhead warning lights for import cars and luxury cars made in Japan, and if you replace the headlight with HID, the bulb will turn on if you are unaware of the computer.
This model is a HID kit made specifically for import and luxury vehicles that allow the HID of headlights without the bulb running on due to a special circuit to prevent malfunction.

★ Wide Compatibility
Traditionally it was necessary to purchase a warning canceller, but the products are sold separately in the corresponding models and years and may not fit your vehicle.
Our Warning Cancellers built-in kit is generally compatible with vehicles that have a warning light in the meter when the headlight bulb runs out.
(*Some vehicles may require separate parts such as relay etc.)

Overwhelming other companies. 0.7 inch (18 mm) thick thin ballast!! ]
★ A smart size that is compatible with cancellers.
The canceller function can be divided into separate modules to help you smarten your ballast. Easily attach the ballast that has been troubled with the large mounting points.
Long lasting body and 100% waterproof

【High Quality HID Bulb Features】
★Precise luminescence point
The bulb emitting point is made to match the starting point of genuine halogen bulbs, so it is possible to achieve the same exact light distribution as the original one.
★UV Protection Quartz Glass
UV degradation and fogging, durable and prevents bulb breakage.
Safe to use with resin lights.

(Can also be attached to fog lights)
While 55 W was the mainstream type with built-in canceller, 35 W can also be installed in fog lights for vehicles that were not possible due to heat problems.

■Package Contents

Product name: Shingoto Warning Canceller, HID Kit
Type: HB4 6000K
Specifications: 12V 35W
Warranty: 1 year
Condition: Brand New

Even if the bulb shape matches the shape, it may not be possible to install due to lack of space, or the distance inside the lens, so please check with your current car before purchasing.
If you have a special type of valve fixing, processing may be required for installation.
Even though the year, vehicle model, and type of model are matched, there are cases where the bulb shape and cannot be installed depending on the conditions and grade of the vehicle.
Therefore, please be sure to check the shape and size of the valve installed in your vehicle.

Indications

■About initial defects and product defects, etc.
·For initial defects or product defects, please contact the Light Collection by email.
·Please check the [Purchase Statement] from your order history and attach the image of the receipt/purchase statement.
(In order to check your purchase history, you will need to send the picture of the purchase description by e-mail. )
Please be sure to specify the defective part before inquiry.

■About the **period of each product
[HID kit with Shinkai brand, genuine replacement HID bulbs, LED headlights]
·1 year from date of purchase.
[Shigatsu KIWAMI Brand HID Kit]
Bulb and other relays included in the kit: 1 year from the date of purchase.
Ballast included in the kit: 3 years from date of purchase.
LED Headlights with LED Shingatsu XR brand
·2 years from date of purchase.
LED / HID Repair Parts / Room Lamp
1 month from date of purchase.

The above **period is only valid within Japan.

■About car inspection support
4300K and 6000K are compatible with vehicle inspection, but we do not guarantee that the product will pass the inspection.
Depending on the shape of the headlight, the cut line may not be properly exhausted or the judgment of the Land and Transport Administration, so we recommend that you return it to the original bulb before inspection.
For the above reasons, please be sure to store the original bulb.

■About the product **
Please check the lights early upon arrival. In the event that there is an initial defect, please contact us within 10 days after receiving the product, and we will replace it by shipping the product.
The shipping costs generated will be fully paid for the Light Collection.
Please be aware that in the event that the replacement product is out of stock, we will refund your money back.
The ballast included in the KIWAMI brand HID kit, genuine replacement HID bulbs, and other relays included in the KIWAMI brand HID kit are for one year after the date of the product shipment, the ballast included in the KIWAMI brand HID kit is 3 years from the date of purchase. If there is a failure within the **period, please identify the fault parts and contact the Light Collection.
Once you contact us, we will repair or exchange it with a new one.
However, the shipping costs for returning the product to the Light Collection is the responsibility of the customer. (*Please note that if the product is shipped by arrival, it will be refused to receive. )
This product is an aftermarket part for automobiles. Be sure to store any parts that have been removed during installation so as to restore it to its original state in case of failure.
The above **is only valid within Japan.

Warranty
We offer 30-day **from date of receipt outside Japan.
We can send you English instruction manual by email. Please do not hesitate to contact us.

Safety Warning

■About installation of HID kit, genuine replacement HID bulbs, and LED headlights
H8/H9/H11/H16 are multipurpose products, but some processing may be required.
To confirm initial defects, be sure to check the light before installation process.
After HID replacement, the lens of the light and reflectors may have fogging or peeling of vapor deposition, but this is not covered under the warranty.
In addition, due to fogging of the lenses, the color of the actual product may differ from the left and right. However, due to differences in the lens side, please note that we cannot replace the product in such cases.
It is also compatible with idling stop vehicles, but due to lack of power may cause flickering or off of lights. (sold separately, please purchase a power stability relay).
We do not recommend 55W for the HID of fog lights. Due to the use of plastic lenses in the lens unit, it may cause burns and reflectors to be unaffected by heat.
Please ask a professional or dealer for installation as it requires expertise.
Please be aware of this before purchasing.
(Light collection does not support or install this item. )
Even though it is installed by a vendor or dealer, there is a bulb burst or ignition in the event of a malfunction.
Valve Burst Factors: If you touch glass directly with your hand, or contact with oil work hands, etc.
Fire Factors : If the wiring is not sufficiently made, there is a flammable object around the ballast that causes high temperatures, when installing H4 valves, the lock is not properly secured.
Many fire information has been reported to the Ministry of Land, Infrastructure and Tourism due to installation mistakes.
If this is the above, please ask the installed contractor to support it directly.
In case that does not support enough, please consult the "Automotive Maintenance Promotion Association" or the "Japan Automotive Maintenance Association" located in various areas.
Japan Automotive Maintenance Association Telephone: 03-3404-6141
·We do not offer support for installation in the light collection, so please ask a specialist.
No matter what reason it is to be put on or take off the factory or other items due to the installation process. Please acknowledge

Legal Disclaimer

■About car inspection support
4300K and 6000K are compatible with vehicle inspection, but we do not guarantee that the product will pass the inspection.
Depending on the shape of the headlight, the cut line may not be properly exhausted or the judgment of the Land and Transport Administration, so we recommend that you return it to the original bulb before inspection.
For the above reasons, when headlights are replaced with HID kits, please be sure to store the original bulb.

■About HID installation
H8/H9/H11/H16 are multipurpose products, but some processing may be required.
To confirm initial defects, be sure to check the light before installation process.
After HID replacement, the lens of the light and reflectors may have fogging or peeling of vapor deposition, but this is not covered under the warranty.
In addition, due to fogging of the lenses, the color of the actual product may differ from the left and right. However, due to differences in the lenses, please note that we cannot replace it in such cases.
It is also compatible with idling stop vehicles, but due to lack of power may cause flickering or off of lights. (sold separately, please purchase a power stability relay).
Please ask a professional or dealer for installation as it requires expertise.
Please be aware of this before purchasing.
(We do not provide support and installation work in our store. )
Even though it is installed by a vendor or dealer, there is a bulb burst or ignition in the event of a malfunction.
Valve Burst Factors: If you touch glass directly with your hand, or contact with oil work hands, etc.
Fire Factors : If the wiring is not sufficiently made, there is a flammable object around the ballast that causes high temperatures, when installing H4 valves, the lock is not properly secured.
Many fire information has been reported to the Ministry of Land, Infrastructure and Tourism due to installation mistakes.
If this is the above, please ask the installed contractor to support it directly.
In case that does not support enough, please consult the "Automotive Maintenance Promotion Association" or the "Japan Automotive Maintenance Association" located in various areas.
Japan Automotive Maintenance Association Telephone: 03-3404-6141
We do not provide support for installation, so please ask a professional to help.
No matter what reason it is to be put on or take off the factory or other items due to the installation process. Please acknowledge

■About the **period of each product
[HID kit with Shinkai brand, genuine replacement HID bulbs, LED headlights]
·1 year from date of purchase.
[Shigatsu KIWAMI Brand HID Kit]
Bulb and other relays included in the kit: 1 year from the date of purchase.
Ballast included in the kit: 3 years from date of purchase.
LED Headlights with LED Shingatsu XR brand
·2 years from date of purchase.
LED / HID Repair Parts / Room Lamp
1 month from date of purchase.
We offer 30-day **from date of receipt outside Japan.

Please check the lights early upon arrival. In the event that there is an initial defect, please contact us within 7 days after the product arrives, and we will replace it by shipping the product.
We will pay full for the shipping costs associated with this product.
Please be aware that in the event that the replacement product is out of stock, we will refund your money back.
HID kits come with 1 year **from the date of shipment. If there is a failure within the **period, please contact us after identifying the defective parts.
Once you contact us, we will repair or exchange it with a new one.
However, in such cases, the shipping costs for returning the product to our shop are responsible for the customer. (*Please note that if the product is shipped by arrival, it will be refused to receive. )
This product is an aftermarket part for automobiles. Be sure to store any parts that have been removed during installation so as to restore it to its original state in case of failure.