[Instructions for use]
1. Insert the receiver into the socket to power the power.
2. Remove the transmitter from the waterproof dustproof cover, then remove the back lid and insert 3 new AAA alkaline batteries properly.
3. Combine the transmitter with the swivel bracket.The mounting plate can be easily attached to a wall or other surface with the included screws, and the angle can be adjusted by using the mounting plate.
4. Turn on the power switch of the transmitter and wait for 10 seconds to enter the working state.
[If the bell does not ring, please operate it as follows:
Press the button on the side of the receiver to check whether it will ring or not. If you ring it, the sensor and receiver may have lost the code and need to be re-coded.
If the receiver does not ring at all and does not light up, the receiver may malfunction. If the receiver is lit and doesnt ring, the speaker may be faulty or set to manner mode. There are 3 switches on the side of the receiver, so please check the operation by yourself.
How to Record
First, set the battery in the sensor to work, connect the receiver, and hold the ringing key on the bottom for 3 seconds.In the press process, the sensor must be detected to activate and light up.After 3 seconds, the receiver will make a successful code - a sound that turns on the repairing.