Feature(may vary by option.)

●(Great for cleaning moss on the surface of the aquarium) Simply apply it when launching or changing the water tank to make it easy to remove the moss on the glass with a sponge. After using the flour, even the slightest moss is easily removed with a sponge!
●Keep your aquarium clean for a long time: Easy to apply and maintain a high level of transparency even without maintenance
●Zero Carbon Keeps Water Clean: Clean and condition your aquarium environment without affecting tropical fish, aquatic grass or bacteria. Delicate aquarium fish and shrimp are OK!
●Increases Clarity and Reduces Reflection: The refractive index of light is close to the water, so the interior of the aquarium looks natural, preventing discoloration and makes the camera angle easier. Perfect for shooting aquariums
●Capacity to choose according to the size: There are 3 different types of colors to match the size of the aquarium. Kukaku was made by specialist in stain release and aquarium products

[Kokeraku 60 5g]

[Kokeraku 90 10g]

[Kokeraku 120 20g]

Description

How Kokaku Works:

Kokakura forms countless protrusions of several nanometers on the surface of the aquarium.

The protrusion creates a thin water film that holds strong hydrophilic properties on the surface.

As a result, it repels moss and stains and is easily removed with a little stimulation.

The moss is not able to stick to the glass surface that was a paradise with a lot of nutrition and light, and it will be fluffy or sucked into the filter, or it can be used to remove moss and make it easy to eat.

In addition, it has an ultra-thin film that is only 30-50 nanometers and hydrogen bonded to the glass surface, and acrylic and plastic are coated with an anchor effect, so it is strong and fine, so it will not be removed even if you scrub it with melamine sponge, and it will not affect the effect.The more you apply the friction between the surface and the surface is pre-treated and the more you wear it.You can apply over and over again so you dont have to worry about making mistakes.

Kokaku is bio-harmless

Since the dough raku does not affect the quality of the water, it does not affect the body and aquatic grass as well as bacteria.Filter may be used immediately after installation.

One of the reasons is the ingredient of the kelping.

Kokekakaku is Zero Organic Matters.The main ingredient, silicon dioxide is the second most natural ingredient that makes up this planet.In addition, the binder (solvent) used to manufacture is also "water", so it does not contain harmful volatile substances or organic substances that affect the water quality.Zero organic (only inorganic) so it will not deform or change color due to heat and UV rays.

Ultra thin film of only 30-50 nanometers, so it will not affect the application of the product.

Best of all, the easiest way to prevent moss is not to cause any stress to the moss itself, but to eliminate the possibility of moss.The ingredients affecting moss may affect other underwater environment, but you dont have to worry about this.

Easy visual effect

It will take a few days to see the effects of moss and you will see it instantly

The refractive index (1.45) is lower than glass (1.52) and closer to water (1.33).By applying both sides, you can see more water and natural inside the aquarium.

In addition, by coating the reflectivity is reduced by 3%, and the transmittance is increased by 0.5-1%.Transform your aquarium into a luxury "high permeability glass aquarium"

The increased amount of light is incorporated into the aquarium, not only looks bright, but it also has a positive impact on your biological growth.In particular, it improves the optical wavelength of 700 nm, so it is highly affected by aquatic grass and medala. The light from inside the aquarium is also efficiently reached to improve contrast.

Reduced reflections make it easier to see when the outside of the aquarium is light.Shoot is easier and allows you to shoot a wider angle than ever before.

Numerous achievements and evidence

The top model of water-based inorganic hydrophilic coating is made to fit aquarium applications as it is the "Kokeuraku" model.

Its effectiveness and performance have been adopted all over the world, and is often used by public institutions. It is also known as the only coating agent in collaboration with JAXA.It is also used on the front glass of all domestic airport control tower cameras.

It is SDGs compatible and has been featured in famous magazines and industries even without carbon or environmental destructive substances.

MSDS, VOC data (VOCs), LD50 (Half Lethal Death Data) and non-combustible test data are all there to be enough evidence to enjoy your aquarium life.

You want to thoroughly protect your precious fish, but also focus on quality.

Easy construction

Zero bio-impact

Easy visual effect

Many Evidence

Easy to Use (Ground Treatment)

Please clean the aquarium thoroughly.

If you are reset aquariums, please remove it so that it does not leave any moss behind.

Then, firmly prep with a microfiber cloth or non-woven fabric or abrasive pad that wont scratch the glass/acrylic surfaces.

As an estimate, the surface becomes shiny and smooth and the water will not repel even if you spray it with a spray bottle.

Easy to use method (Coating)

Apply a small amount of effortless scrubbing onto a plain woven microfiber cloth such as a glasses wipe, and apply a little force to every corner and rub it onto the glass/acrylic/plastic surface.

If you apply the paint surface slightly by one of the first place, you can apply it more efficiently.

Rice granules are easy to apply on surfaces of approximately 7.9 x 7.9 inches (20 x 20 cm).Sprinkle water with just a little spray bottle for easy stretching.

Once fully spread out, use a wet microfiber cloth to wipe away any uneven spots.

MAINTENANCE

Please clean it easily when changing water or resetting.

Remove the dirt from coated surface with a soft sponge or magnetic type cleaner.It should be taken off lightly.

Easy to use with melamine sponge and fish tank scraper (glass aquarium only).

If you find a part that is not enough, please pre-treat/reapply just that place.

Check Method

How to check if the coating worked well

After coating, spray water with a spray bottle.When properly coated, it will not repel water and quickly fluff onto the surface.After confirming the hydrophilic condition, wipe thoroughly and then spray again to check it.If you can check the hydrophilic properties, it is successful.

If it doesnt work well, just start it back from priming.