Feature(may vary by option.)
●Equipped with a flowing turn signal function and built-in canceller, so you can rest assured of the design
●0.1 inch (3 mm) thick, it can be installed in narrow gaps. The thin and flat back surface allows you to attach it with strong double-sided tape
●The soft tube material does not use screws and will not cause annoying procedures or damage to your car
●Cut to length. It is so versatile, the possibilities are endless depending on your imagination. (When cutting, be sure to be waterproof. )
●When the light is smaller, it glows white as a position light. The amber flows through the turn signal action is switched between 2 colors. There may be cases where the turn signal function cannot be used on some vehicles. Please acknowledge
[blue & amber]
[white & amber]
Description
Product Specifications
Voltage: 12V
Power consumption: 4 W
Number of LED chips: 75 strands (one side)
Waterproof Rating: IP67
Length:60cm
Thickness: 3mm
Emitting Color: White/Amber
Wiring
Black wire: ACC / Position lamp negative side
Red wire: ACC / position lamp positive side
Yellow Line: Positive side of turn signals
Position/daylight light: black wire + red wire
Turn signal lighting: black wire + yellow line.
Note
May not flow until the end of the turn signal.
The flash speed of the turn signal may be too fast.
1. Connect the red line to ACC positive for improvements. 2. The yellow wire does not pass through the turn signal relay and replaces the wiring.
The daylight and turn signals are not able to light up at the same time. If the power is connected at the same time, the turn signal will light up.