(Product Details)
Solar Style Plus 908, 17.6 oz (500 g)
Dedicated hardening agent F-10, 0.7 oz (20 g)
Putty Thickness: Approximately 0.1 inch (3 mm)
Color: Light gray
Grinding Time: (forced dry) 140°F (60°C) x 5 minutes + 5 minutes of discharge
Dry at room temperatures: 44°F (20°C) x 10 minutes or more.
[Use]
Repair plastic parts such as car bumpers
Features:
Excellent adhesion to plastic such as bumpers.
Very flexible and can also be used for bears when installing bumpers.
The edges are extremely easy to create and achieve a better finish easily.
Good grinding properties, fine texture, excellent workability and finish.
Due to the significant improvement in flexibility, the rashes (warping) associated with the cure of the putty.
How to Use:
1. Please thoroughly apply underground treatments such as polishing surface (P180 - P240), degreasing (silicone off).
2. Add the hardener "F-10" to the main agent at a ratio of 2% and kneading.
3. Apply the putty first, and blend the putty into the ground paper, then apply to the desired thickness.
4. For grinding work, use coarse paper first, and finish with fine paper sequentially.
[Note]
Hardener is too small or too much will cause failure. Please use appropriate amount.
Before use, please thoroughly rub the main agent and loosen it evenly before use.
Cure time may vary slightly depending on temperature. Especially at temperatures below 12°F (5°C), the hardening will be significantly delayed, so please forced to dry.
The main agent, hardener is sealed and stored in a cool, dark place (less than 77°F (25°C) and below) away from fire or direct sunlight.