Feature

●This product is a product of the PJC series that can only be sold by Pascal Japan Co., Ltd. (Height up and down 17.7 - 27.6 inches (45 - 70 cm)) Printer stand and side desk. Top plate size: W 21.7 x D 1.7 inches (55 x 45 cm); Height is freely adjustable; Regarding the position of the lock: The scalloped edges are just a scale. The lock position is freely and can be used anywhere. (Only within adjustment range) Example: You can also adjust it in 1mm increments. Example: 64.5cm (645mm) can be set
●The top board is made of high-density MDF composite wood. The surface is made of a PVC cosmetic sheet that is resistant to water. The wood grain pattern on the surface uses a luxurious wood grain pattern. The surface of the top board has a slight embossing, but if you are writing a note, you can place copy paper on the top plate and write the text directly. (Please use a underlayment or other information when performing a checkout.) The top plate is processed with rounded corners and a post foam processing with an angled front
●2.0 inch (50 mm) casters on the leg. (2 of them include brakes); Open the frame lock parts attached to the 4 frame locations and lift the top board with 2 people when you open the frame and lift it up with 2 people
●Product load capacity is 44.1 lbs (20 kg), shelf board 44.1 lbs (20 kg) (static / distributed load). When using with a weight close to the load capacity, be sure to spread it out and place it. Even if the product is used within the load capacity, it is not possible to install heavy objects that cannot be distributed and arranged. This product may damage if you place your equipment or luggage on the go. When moving, please handle carefully to avoid any load. ■: This product requires assembly. Estimated assembly time of 30 to 60 minutes (must be assembled with two or more people)


Description

Up and down type printer wagon comparison

Up and down printer wagon comparisonUp and down printer wagon comparison
Height adjustment is approx.Height adjustment is approx.

The height can be adjusted by 0.04 inch (1 mm) increments

The inner frame of Suzi=Mizo is just memory.

The height adjustment can be set in 1mm increments regardless of the memory.

You can adjust it to your desired height if the height is in your settings.