Feature(may vary by option.)
●(Energy Saving Fast Heat) The electric immersion water heater can boil 1,500 W, and the temperature of 10 liters of water can be boiled in about 4 minutes. However, the specific time and temperature of heating of the water is large. The 10 liters of water will be slightly longer in the winter. The power consumption is 1.5 kWh and saves some gas costs to enter the bath
●Automatic Power Off Heater: This 1500 W electric water heater features high output, energy saving, fast heating, and automatic power off function. When water is heated to 70°C, the water heater will automatically turn off and the indicator light will turn on. Turns off. Disconnect the water heater immediately after heating the water. Automatic power off repeatedly heating up as the water temperature lows, and the amount of water will evaporate when heated repeatedly
●(Easy Operation) Fill the container to completely cover the pool heater, and plug it into the ground wall outlet. Then the image heater begins to work. Before inserting the heater, please make sure the heater is completely submerged in water, then connect an easy-to-use power supply
●High Performance: After PSE safety certification product testing, the water heater has an automatic shutdown function with a lifespan of over 100,000 hours. When the water temperature reaches about 70 degrees Celsius. (Do not touch water): Do not remove the plug, the water temperature drops to about 50 degrees Celsius.)
●Wide range of uses: The water heater can be used for inflatable pools, buckets, washbasins, bathtubs, small pools, and so on. It is very easy to carry, and can be used indoors or outdoors.
[a]
[b]
[c]
Description
Product Description: 1500 W, only takes a few minutes to heat up the water.
Why choose our dipped water heater?
1. Fast heating, high output, significant time saving.
2. Wide application, suitable for winter work.
3.High quality stainless steel, anti-rust and durable.
4.Waterproof power cord for indoor and outdoor use.
Are you looking for an efficient and safe immersed water heater?
Protective tube, double heating tube 1. Protective tube
The rust-proof stainless steel protective cover is designed to keep you away from direct contact with the heating element, thereby providing protection to prevent accidental injuries.
2. Double heating tube
Our heater has two heating tubes to make heating more efficient. It only takes a few minutes to boil 5 gallons of water.
Indicator Light, Thick Copper Wire 1. Indicator Light
Waterproof indicator on the back of the heater When the red signal is lit, it means the work has started.
2. Thick copper wire
High quality copper power cord is thicker to carry more power without overheating, smoking or fire, reducing the risk of use.
Water tight seal, rapid heating 1. Waterproof seal
No more worrying about electricity being exposed to water. The joints are airtight, so the copper wire will come into contact with water.
2. Rapid heating
1500W high power water heater is designed to reduce heating time and greatly save time. The heating experience is 3 times faster than other water heaters, practical and efficient.
Please read the instructions carefully before using the dip kettle.
While the heater is very convenient, it is very dangerous to cause fires.
Voltage: 100V-110V-125V
Power: 1500 W
Cable: 4.9 ft (1.5 m)
Material: 304 Stainless Steel
Package included: 1 x Water Heater, 1 x Thermometer (thermometer temperature is Celsius)
Packing: Boxed
Packing size: 10.2 x 2.0 x 2.0 inches (26 x 5 x 5 cm); 19.7 oz (5
! Please read the instruction manual carefully before use.
Use thermometer to check water temperature
Do not touch water while heating
Please make sure that the water is submerged in the heater and the heater components do not get away from water during the heating process.
Because the heater output is high, please do not connect two heaters to the same socket.
Special Note:
Make sure to use the product correctly, and according to the demands of the images, soak the heating rod in all areas. While the heater is very convenient, it is very dangerous to cause fires. Please gently unplug the outlet with your hand after use. Remove the cover and wipe off the water droplets on the heater surface for a long time. The temperature is fixed by the environment of the outside air and water flow. When there is a lot of water, especially the temperature difference between the surface and the bottom of the thermo will be error. Mix water, etc.