Feature

●Low voltage USB powered type can be used anytime, anywhere
●Super mini size that can be easily used by women and has strong power
●Includes a Japanese instruction manual with frequent instructions for drilling and changing drills
●Wide range of applications: Easily fits a wide range of materials including plastic models, pearls, resin, wood, plastic, shells, etc
●Package Contents: Electric pin vice x 1, drill x 13 (0.9 mm x 10 + 1.1 mm x 3), main storage case x 1, Japanese instruction manual x 1


Description

Product Specifications: Material: Metal + Plastic, Color: Black Power Supply: DC 5V Rated Output Power: 18W No Load Speed: 11000 rpm Suitable Collet Range: 0.8-1.1mm Drill Length (Drill Bit Not Included): Approx. 110mm / 4.33inch Drill Diameter: Approx. 30mm / 1.18inch USB Cable Length: Approx. 1.5m / 4.92ft Weight: Approx. 4.5 oz Package Includes: 1 x electric drill with USB cable (adapter not included) 3 x drill bits (diameter 0.04 inch (1.1 mm) x wrench Note: (Note: This product is not suitable for drilling these materials, such as bodhi, thick metal, walls, stones, etc. This set is compatible with 0.03 - 0.05 inch (0.8 - 1.2 mm) thick drills, but by replacing the collet chuck you can attach larger parts such as drills or carving, polishing, and cutting. Note: Replacement chucks and parts are purchased separately, but please make sure that the chuck matches the shaft thickness of the main body (0.08 inch (2 mm)). How to replace the collet chuck: A. Loosen the screw on the chuck with the hex wrench and pull out the chuck part.B. Put the replacement chuck and tighten it with the hex wrench. For beginners: Step 1. Mark the area you want to drill a hole with a pencil or pen. Step 2. Mark with sharp or striking, and then put the pin vise to prevent slipping. Step 3. Drill the hole vertically into the surface. If you think it is defective or faulty: 1. Use the USB power supply to input or output at 5V/2A. 2. Please make sure the screws on the side of the chuck are loose.