Top selling switch standard since its launch. Versatile.
Easy to use contact block: IP20 finger protection construction, easy to install and remove, screw fall prevention, 2-way wiring to choose from.
Protective structure: IP65, IP40 (IEC60529)
Main models are UL, CSA certified, and EN standards.
Contact Rating
[Selector Switch]
Rated insulation voltage: 600 V
Rated current: 10A
Contact rated based on load types of used: JIS C8201-5-1 IEC60947-5-1
AC-15(A600)
DC-13
Performance Specifications
[Standard usage]
Ambient operating temperature
Non-illumination: -25 to +70 degrees Celsius (but not freezing)
Illumination: -25 to +50 degrees Celsius (but not freeze).
Storage Ambient Temperature: -40 - +80 °C (-40 - +80 °C) (But do not freeze).
Ambient Humidity: 45 - 85% RH (but not condensation).
Contact Resistance: Less than 50 mΩ (initial value)
Insulation Resistance: Over 100 MΩ (DC 500 V Mega)
[Withstanding Voltage]
Charging and non-charging parts: AC 2500 V, 1 minute
AC2000V / 1 minute (Pilot Light AC/DC6V, 12V, 24V)
[Vibration Resistant]
Durability: 30 Hz, Single Amplitude 0.06 inch (1.5 mm)
Malfunctions: 5 - 55 Hz, single swinging width: 0.02 inches (0.5 mm).
[Shockproof]
Durability: 1,000 m/s^^2
Malfunction: 328.4 ft (100 m) per s^^^2
Mechanical Life: More than 500,000 times.
Electrical Life (*1): Over 500,000 times open and close frequency 1,200 times per hour, using rate of 40%.
[Contact configuration] 2a
[Number of Notches in Notches] 45°-3
Operating Method: Stops each position.
*1) Load condition: AC220V 3A(AC-15)
Protective construction
[Series] TWN Series
[Unit] Selector switch
[Typical Number] ASN, ASN □L
[IEC 60529] IP65
[JIS C 0920] Dust Resistant / Flow
In accordance with the standards of protection structure, the product has been tested in a test room.
(The evaluation is installed in the housing and validates its impact on the housing or inside the main unit. )