High quality carrier board for Raspberry Pi CM3
The RPi-CM3MB2/-PoE is a carrier board product that supports the SoM "Raspberry Pi Compute Module 3/ 3 Lite (CM3 / CM3 Lite)" aimed to IoT in industrial and embedded devices.With its integrated design, it can be used for a variety of purposes as well as FA/LA controls, and it can be used as sensor devices, network cameras, and digital signage devices.
|
|
|
---|---|---|
Compatible with Compute Mobule 3/3 LiteRPi-CM3MB2 / -PoE is compatible with the "Raspberry Pi Compute Module 3/ 3 Lite (CM3 / CM3 Lite)" SoM for IoT in industrial and embedded devices. You can build a variety of control systems by setting CM3 in the SO-DIMM slot of this product and running applications that fit the connected device. |
Power On / Off circuit (software shutdown)This product is equipped with a hardware button for shutdown that allows you to turn the power on and off with a single button.Not only does it prevent unexpected overcurrent due to plugging and unplugging the power cable connected to the Raspberry Pi. |
Built-in microSD slot for Compute Module 3 LiteThis product can be used with RaspberryPi CM3, and even when using CM3 Lite that does not have flash storage, you can also set the SD card into the microSD slot on the board to start operating the OS. Not only does it allow you to lower your initial cost, but if you have any system issues, you can create a backup system to reduce downtime during the recovery process. |
|
|
|
|
---|---|---|---|
Equipped with a lithium ion battery that can be safely terminated even when the power is lost.This product is equipped with a lithium-ion battery for backup that allows you to safely stop operating even when unexpected power outages, such as lightning strikes or disconnections. Automatically transitions to standby power during power outages, so you can shut down the system without any interruptions. |
Equipped with GPIO header compatible with Raspberry Pi 2B/3This product features a 40P GPIO header compatible with Raspberry Pi 2 model b / 3 and can be used with the add-on board HAT for Raspberry Pi 2 and 3. |
Equipped with 3 LEDs to indicate working statusEquipped with 3 LEDs (Power LED, Status LED and Shutdown LED) that allow you to check the operating status of the system at a glance. It also has an external extension connector for LED and Shutdown switches to be integrated into a variety of housings. |
|
Name: | Raspberry Pi CM3 Carrier Board - Standard Edition |
Model No. | RPi-CM3MB2 |
Compatible with Raspberry Pi | Raspberry Pi Compute Module 3, Raspberry Pi Compute Module 3 Lite |
RTC | Equipped with (CR2032 battery backup). |
Power Switch | Power ON/OFF Button |
Power Supply Voltage | DC +12V/3A *Supply via DC jack or 2-pin XH connector. |
External Dimensions | Approx. 166mm x 112mm (W x D) |
Case Compatible | Takashi Denki PF18-4-12, PF18-5-12 (HAT expansion circuit board can be built) |
Weight | Approx. 4.1 oz (112 g) *Main unit board |
Operating Environment | Temperature: 32 - 104°F (0 - 40°C) / Humidity: 20 - 80% (but not condensation). |
Package Contents | RPi-CM3MB2 unit, CR2032 battery (for rTC backup), supplementary document x 1 |
MicroSD Slot | Push-Push card slot x 1; *Can be used only as a system drive when using Compute Module3 Lite |
HDMI output | HDMI Std. A connector x 1. *Up to 1080p / 60Hz depending on the specifications of the Raspberry Pi. |
USB Host | USB Type A x3 (front x1, rear x2), Pin header x1 (extended GPIO connector) *USB 2.0 High Speed compatible |
Ethernet | 10/100BASE-TX RJ45 x1 |
GPIO | 1 x 40-pin pin header compliant with HAT specification and an extended 8-pin pin pin header |
DC Input | DC+12V/3A x1 |