Feature
●Volume: 2.8 fl oz (80
●Condition of content: slightly viscosy, liquid, milky white
●Container: PET container + cap
●Ingredients: Ultra fine particulate special solution, silicone reinforced resin, oil based second solvent (non-abrasive)
●Accessories: 1 each large and small sponge, 1 bamboo skewer. *Towel and work gloves are not included
Description
From removing dirt and polishing to removing scratches (hidden).
This liquid body coat is not only suitable for dirt removal, water spots, old wax removal, paint removal, scratch removal (hidden), rust removal, but also has excellent protective glaze.
Paint colors except matte and can be used for many coatings. Not only for painted surfaces, but also for wheels, meter panels, wood panels, car navigation TV monitors and more.
The pitchless coat does not contain any abrasives, so it can be used on delicate parts such as plastic and plating.
Not only for cars and motorcycles, it can also be used for plating faucets in your home.
Supplied ready to use
In addition to the pitchless coat body (red label container), sponge, and other accessories that you can start using it quickly.
Pitchless coat body
80ml Cap Bottle
Square sponge (large and small)
Large: For finishing large areas such as hoods.
Small: For finishing details such as wood panels
Cleaning towel (Material: Cotton)
Unlike regular waxes, this product is "sponge restored", so it is not used for wiping off a pitchless coat that has been applied or is used to check if there is uneven paint or finish.
Bamboo skewers.
Wrap a towel to clean and finish gaps that are deep and difficult to get your fingers.
<Compound not included]
The pitchless coat has no compound, so "scrubbing" removes dirt from scratches and fills the scratches to make it inconspicuous.
Gloves not included.
80ml pitchless coat does not include sponge cleaning gloves
If the sponge contains too much pitchless coat and becomes difficult to use, you can prepare a regular work gloves and use it while cleaning with work hands.
[How to use] Apply in a vertical and horizontal circle with light force without scrubbing
Rub with a sponge with a light force to draw vertical and horizontal circles, then put the excess pitchless coat back into the sponge and finally wipe off with a towel.
Example Usage 1 Door Knob Scratches
Apply the pitchless coat to the sponge once and lightly rub it and finally wipe it off with a towel.
It will be damaged and stained before finishing.Shake the container well and place the sponge on the mouth of the container. Shake it up and down once to get the pitchless coat that is only the amount of the mouth of the container.Rub the sponge with a small force that can be crushed about 1/3 - 1/4 by 1/4.Half finished.Rub lightly as 3, then put back the sponge back to remove excess pitchless coat on the door knob.Finally, wipe with a towel with a gentle.Done!Deep scratches are left but inconspicuous.
[Make a vertical and horizontal circle]
Dirt and paint attachments can be easily removed by attacking from the 8 directions, and the scratches can be applied to the corners of the scratch, so you can rub it (coat) in a vertical or horizontal direction.
[About "Sponge Restoring" ]
After applying the pitchless coat, remove the remaining pitchless coat on the back of the sponge (the side that is less penetrating the pitchless coat) before wiping it with a towel.
We call this sponge back.
[About towel wipe]
It is not a general method of applying wax or applying it to dry and wiping it off.
Apply and remove sponge before it dries and wipe gently with a towel.
The towel cloth is done only to wipe the pitchless coat that couldnt be sucked even after the sponge is returned to ensure it is fully applied.
(Examples: Hide scratches and eliminate scuffs) Sometimes scrubbing.
If you want to remove scratches (hidden) or remove rubbing marks in the same manner as "Example 1".
Example Usage 2:
There are countless scratches before installation. Gently apply the pitchless coat in a small area of 7.9 - 11.8 inches (20 - 30 cm) square, and then return the sponge (suck off the excess pitchless coat without pressing the sponge).Finally, lightly wipe off any unevenness with a towel.
Example Usage 3:
The paint on the part (pole) before installation is rubbed. Keep scrubbing the same area slightly stronger (enough the sponge is half crushed) and repeatedly.Combine the vertical and horizontal circles to apply the paint from the four sides.Finally, simply return the sponge back and wipe it lightly with a towel.There will be some scratches left when rubbed like the small picture on the bottom right, but no white marks.
(Other examples) Other than the paint parts of cars and motorcycles, it can also be used for plating and plastic, etc.
In addition to your car or motorcycle, you can also clean your home plating.
Carbon material and plating for each wheel car and motorcycle, such as car and motorcycle headlights, taillights, cars, motorcycles, aluminum plating, etc.
Helmet ceramic ornaments (dolls and piggy banks), metal bands for plated watches such as faucets (curans), necklaces and rings, tools, cabinet golf club heads and shafts.
Warning:
Deep scratches can be slightly inconspicuous, but cannot be filled too invisible. After installation, the pitchless coat will gradually lose weight due to rain or car washing, so regular care is required.When using a wide area such as a hood, please install it every 7.9 - 11.8 inches (20 - 30 cm).Once applied to a large area, it becomes more noticeable.If the paint is overflowing and the substrate can be removed but cannot be hidden.Soft materials such as car pillars, bike screens, etc., can also cause scratches when using a new sponge, so please use a soft sponge after repeated use, and apply with light force without pressing it.