Feature

●Specially formulated polyurethane gel for speaker insulators
●Conical load-bearing shape is designed to always focus center force
●Suitable load: Minimum load: 10.9 lbs (4.9 kg) (1 piece), Suitable load: 22.0 lbs (10.4 kg) (1 piece); Maximum load: 70.9 lbs (39.1 kg) (1 piece)
●Installation: Suggested to use the logo in the correct reading direction, but the sound will change by changing the position up or down You can enjoy changing the tone of the tone, so you can use it in any direction
●Size:W350 (300) mm X H200mm/1pc,Weight:20g/pcs


Description

BUREEN is a speaker insulator born from a whole new material that insulates vibrations. BUREEN has been made into a speaker insulator with a shape that is considered a special material.



From the Manufacturer



22

BUREEN is a speaker insulator born from a whole new material that insulates vibrations.

Specially formulated polyurethane gel for speaker insulators.It is designed to be very visco-elastic so it has a very different property than rubber and other elastomers.

1111

Transmission rate (3 point support: 10% distortion) / Load 22.0 lbs (10.4 kg) x 3 pieces = 31.2 kg

A graph of the vibration transmission rate when supporting 30kg speakers 3 points.You will notice that almost isolating and transmitting vibrations from the audible range.

You will notice that the speaker will not transmit vibrations to most locations (desk, floor, stand, etc.)

NiCSo BUREEN Features

33

44

55

About the size measure

W300mm - W350mm

H 7.9 inches (200 mm)

20g (1 piece)

About the shape

We also pay attention to the shape. The cone loading shape is designed to always focus on the center of the force.

About Material

Specially formulated polyurethane gel for speaker insulators.It is designed to be very visco-elastic so it has a very different property than rubber and other elastomers.

1212

1313

1313

About Installation

When used in the direction where the logo can be read, the sound will be changed by changing the position up or down.You can enjoy changing the tone of the tone, so you can use it in any direction.

Placement Information

Do not exceed 40kg of BUREEN3 points support is basic, but if you need heavy speakers, please increase the number of BUREEN.

[Note]

Be sure to place BUREEN evenly in a distorted position to avoid tilting or tipping.For 3 point instructions, it is recommended to install 2 pieces on a heavy side.

Washable

When it gets dirty, you can wash itSimply lightly rub the surface with mild detergent to clean.Please note that the logo may come off if you rub it hard on the logo.