[01-green changing blue 1 piece - Approx. A4 size Approx. 20cm x 30cm]
[02-Blue changing purple method 50cm x approx. 10 meters]
[03-purple changing dark green method 20cm x approx. 5 meters]
[04-patina changing purple method 50cm x approx. 10 meters]
The sizes are not exactly A4 sizes. Size: A4 Size (Approx. 7.9 x 11.8 inches (20 x 30 cm)). This is an iron print for cotton fabric. Cannot be used with water-repellent or specially treated materials or nylon fabric such as windbreakers. How to use: 1) A tool to cut the finished design is required. Please prepare it according to your purposes, such as scissors, cutters, cutting boards (if you have a cutting machine) etc. Heat transfer, so please prepare a silicone sheet. (You can use "silicone resin" cookies, gushito, etc.). 2) Cut the pre-made motif design. It will flip back during transitions, so you can cut it by flipping it to create it. The glossy surface becomes a peel off film. Cut the back side! 3) Peel off the unnecessary area. Remove debris firmly so there is no excess on the transparent release film. 4) When you remove it cleanly, balance it with the transfer T-shirt and place the design sheet on top of the ironing board so that the transparent release film is on top. 5) Place the silicone sheet on the sheet of the design; place the iron firmly on the entire surface for about 10-20 seconds at about 150°C to 160°C. Please note that there may be irregularities depending on the iron. It cannot be applied if it is not firmly hit. Recommended ironing temperature is 264°F (160°C). (Please check your instruction manual or manufacturer with the instruction manual for the iron) 6) Peel off the transparent film while it is hot. Sometimes it may stick to the release film, so please gently peel it off while looking at the process. Depending on the environment, heat, and the application of the product, it may be easier to peel off after the heat has been cooled. (*Fluorescent yellow is slightly colder and it is easy to peel off. [One Point Tip] If the paste is poor and it floats a little after peeling off the film, you can put the silicone sheet back on and iron it will stick to the fabric. 7) When crimped cleanly, youre done! If the transfer sheet has a feeling of uneven fibers. Easily create your own T-shirts, hoodies, bags, event supplies and more with these iron sheets. Due to the production process of this product, there may be cases where the dust may adhere between the sheet to the sheet to be peeled off. This does not affect the use of this product. Our staff also tried the sample product during the production of the samples, and if it was dropped off dust and there was no problem with the work or finish. Please rest assured. Thank you for your understanding.