Feature

●✔ Output Voltage: Output AC85V-260V / Output Signal; Model Number: AK-RK01SE ; Operating Voltage: AC85V-260V; Operating Frequency: 315mhz ; Maximum Load Current: 10A
●✔【Widely Used】The remote switch is a wide range of applications from simple household remote control to autonomous control. Wireless remote control switch can control light, motor, fan, lift device, entrance access, up-down controller, alarm system, garage door, electric door / lock/window/blind/car or other equipment
●✔ 【Signal Stability】This RF remote control adopts RF technology and stable signal. The wireless RF switch signal can be controlled steadily from anywhere within a reliable distance by passing through walls, floors, and doors, remote distance: 66.4 - 164.4 ft (20 - 50 m)
●✔ 【Advantage】Wireless receiver controller with high confidentiality, stable performance, low power consumption. Resists interference: Adopts omnidirectional wireless encoding technology, allowing independent control without mutual interference
●✔ 【Easy & Convenient】Wireless control, easy to install. We tested the transmitter and receiver to work together and before shipping (we send Latch Mode). Working mode can be changed with the jumper of the pin: Momentary / Toggle / Latch


Description

About Receiver:
Model Number: AK-RK01SE
1. Operating voltage: AC85V-260V
2.Coding Type:Learning Code
3. Operating temperature: -40 degree +80 degree
4. Receiver sensitivity: -105dBm or higher
5. Operating frequency: 315mhz
6. Output Voltage: Output AC85V-260V / Output Signal
7. Buck approach: resistance capacity
8. Max load current: 10A
Size: PCB 65 * 37 * 17.5mm 9.
Shell: 3.3 x 1.6 x 0.8 inches (83.5 x 41.5 x 21.5 mm)

How to work:
The operation method varies by the jumper of the pin.
Moment: The jumper does not connect any two pins. Relay: Long Press->On; Release->Off
Toggle: Jumper connects pin 1 and pin 2. Relay: Press->ON; Press the same button again->OFF
Latch: Jumper connects pin 2 and pin 3 Relay: Press->ON; Press the other button ->OFF

Learning and Clear Method:
Learning: Enter 110V into the receiver. LED indicator is on. Press the Learning button to turn off the indicator and then press any button on the remote. The indicator flashes 3 times. This means learning has successful.
Clear: Press and hold the learning button for about 8 seconds, the indicator turns off to ON, then press the remote, the relay does not respond, but it means the code has been clear.

Note:
1. If you need voltage output during use, please refer to the wiring diagram in picture 8.
2. Please refer to the wiring diagram in picture 9 while using the signal output.
Customer satisfaction is our eternal pursuit and goal. If you have any questions, please contact us. We will help you. Thank you!

About Transmitter:
1. Button: Two Buttons
2. Operating voltage: DC12V(1PCS 27A)
3. Operating frequency: 315MHz
4. Remote distance: 20-50M
5. Working current: 13 mAh
6. Encode: fixed code/ EV1527 code
7. Size:5.5*3*1.4cm

Package Includes:
2 x Transmitter
1 x Receiver
1 x User Manual