Product Description:
Multi-lex valve series that controls a wide variety of fluids.
NC (open during power connection) type
RoHS
CE
JIS standards
[Use]
Connection diameter: Rc3/8
Orifice diameter: 0.3 inches (7.0 mm)
Maximum operating pressure difference.
Air → 0.25 MPa
Water, hot water, kerosene → 0.2 MPa
Oil (1.9 cubic inches (50 cubic mm/s) → 0.15 MPa
Steam → 0.2 MPa
Maximum working pressure: 5 MPa (fluid: 1 for steam)
Rated voltage: AC 100 V, 50/60 Hz.
Phase power
When holding (50/60Hz) → 18/15VA, Starting (50/60Hz) → 29/24VA
Power consumption (AC 50/60Hz) → 6.7/5.7W, DC → 11W
Flow Rate Characteristics
C → 4.8 cubic decimeters / (s / bar)
b → 0.29, cv → 1.0
Grommet lead wire: 11.8 inches (300 mm)
[Other Specifications]
Fluids Used: Air/low vacuum (1.33 x 10 [[2 squares]); Water, kerosene and oil (under 50 sq in/s per second); Pressure resistance (under water pressure): 25 MPa; Fluid temperature: -10 - 60 degrees (without freezing); Ambient temperature: -20 - 60 degrees; Heat resistant class: B; Atmosphere: Corrosive gas, explosion. Locations without gases. Valve structure: direct action poppet structure; Valve-seat leakage (in air): 0.2 cubic inches (0.2 cubic cm) per minute (ANR) and less Installation posture: free; Body seal material: brass, nitrile rubber; Material: stainless steel (core assembly, plunger spring), copper (shading coil), nitrile rubber (O-ring seal), brass or bronze (body); Voltage (body): 1000.5 (body) Open frame with built-in diodes Coils, terminal boxes, etc.
[Caution and Conditions]
Caution:
Please use the voltage fluctuations within ±10% of the rated voltage.
When using low vacuum, pull out the vacuum on the OUT.
The image is an AB41 series product image.
Image Notes:
The images used are for illustrative purposes only, color and specifications may differ from the actual product.