Feature
●(Energy Saving Fast Heat) The electric immersion water heater is 1,500 W, and the 10 liters of water boil in about 4 minutes, but the specified time of heating the water is much related to the temperature of the water, and the 3.2 gal (10 L) of water heats up in summer and winter, the time will be a little longer in winter. No thermometer is required, and you can see the water gets hot with the naked eye. With 1.5 kWh power consumption, you save on certain gas bills to get into the bath. (This product needs to be supervised by someone
●Easy to operate: Fill the container with water to completely cover the pool heater, and insert water into the ground socket on the wall. Before inserting the heater, make sure the heater is completely submerged in water before connecting the easy-to-use power supply. You will receive one wire scrubber. Due to water quality problems, the inner core absorbs impurities in the water, and after a while, heating the water will appear floating and sediment. Rotate the round cover hard to remove and clean wick with wire scrubbers
●Automatic Power Off Heater: This 1500 W electric water heater features high output, energy saving, fast heating, and automatic power off function. When water is heated to 70°C, the water heater will automatically turn off and the indicator light will turn on. Turns off. Disconnect the water heater immediately after heating the water. The automatic power off repeatedly heats up as the water temperature lows, and after repeated heating, the amount of water will evaporate, and when used on a water heater lower than a water heater. For your safety, please use the heater correctly.
●High Performance: After PSE safety certification product testing, the water heater has an automatic shutdown function with a lifespan of over 100,000 hours. When the water temperature reaches about 70 degrees Celsius. (Do not touch water): Do not remove the plug, the water temperature drops to about 50 degrees Celsius.)
●Wide range of uses: The water heater can be used for inflatable pools, buckets, washbasins, bathtubs, small pools, and so on, very easy to carry, and can be used indoors or outdoors. Thank you! "
Description
Why choose our dipped water heater?
1. Fast heating, high output, significant time saving.
2. Wide application, suitable for winter work.
3.High quality stainless steel, anti-rust and durable.
4.Waterproof power cord for indoor and outdoor use.
|
|
|
|
|---|---|---|
Protective tube, double heating tube1. Protective Tube The rust-proof stainless steel protective cover is designed to keep you away from direct contact with the heating element, thereby providing protection to prevent accidental injuries. 2. Double heating tube Our heater has two heating tubes to make heating more efficient. It only takes a few minutes to boil 5 gallons of water. |
Water tight seal, rapid heating1. Waterproof seal No more worrying about electricity being exposed to water. The joints are airtight, so the copper wire will come into contact with water. 2. Rapid heating 1500W high power water heater is designed to reduce heating time and greatly save time.The heating experience is 3 times faster than other water heaters, practical and efficient. |
Indicator Light, Thick Copper Wire1. Indicator Light Waterproof indicator on the back of the heater When the red signal is lit, it means the work has started. 2. Thick copper wire High quality copper power cord is thicker to carry more power without overheating, smoking or fire, reducing the risk of use. |
Please read the instructions carefully before using the dip kettle.
While the heater is very convenient, it is very dangerous to cause fires.
Due to water quality, please rotate and open the stainless steel lid, wash the wick inside with a wire scrubber, and continue using.
Brand: Dzannc
Voltage: 100V-110V-125V
Power: 1500 W
Cable: 4.9 ft (1.5 m)
Material: 304 Stainless Steel
Package Includes: 1 x Water Heater, 1 x Wire Scrubber
Packing: Boxed
Packing size: 10.2 x 2.0 x 2.0 inches (26 x 5 x 5 cm); 19.7 oz (5
Please read the instruction manual carefully before use.
|
|
|
|
|---|---|---|
|
The heat-sensitive device is inside the plastic case of the head and cannot be turned on if the heater is all in the water. |
Do not touch water while heating |
Please make sure that the water is submerged in the heater and the heater components do not get away from water during the heating process. |
1. Indicator light: When the red light is on, it means that the work has been started.
2. Waterproof seal: No need to worry about electricity coming into contact with water. The connectors are airtight, so the copper wire is in direct contact with water.
3. The red lamp is lit while the temperature is rising from water to about 70 degrees Celsius.
4. When the water temperature reaches about 70 degrees Celsius, it will automatically turn off and the red lamp will turn off.
5. When the temperature drops to 60 degrees Celsius, it will automatically turn on and the red light will turn on.
Make sure to use the product correctly, and according to the demands of the images, soak the heating rod in all areas.
While the heater is very convenient, it is very dangerous to cause fires.
Please gently unplug the outlet with your hand after use.
Remove the cover and wipe off the water droplets on the heater surface for a long time.
The temperature is fixed by the environment of the outside air and water flow.
When there is a lot of water, especially the temperature difference between the surface and the bottom of the thermo will be error.
Mix water, etc.