Feature

●1. This device is primarily used to measure the dynamic viscosity of fluid coatings close to Newton fluid or Newton fluid, and can also be used as needed to compare the measurements
●2. Correction coefficient K value is the time after filling secondary standard oil with the temperature condition (such as 20°C±0.1°C), flow time must be within 1±0.03 Viscosity meter must be calibrated regularly within the frequency of use
●3. Place the viscous cup in a horizontal bubble measuring coupling, adjust the horizontal screw on the base to match the bubble center. The capacity of the receiver cup is about 150ml, which is used for measuring liquid
●4. Viscosity LND-1 Viscosity Meter is the viscosity of the condition, i.e. a sample of the certain amount at the temperature and the viscosity of the set opening holes in seconds over time
●5. If you receive the damaged item, please contact us for full refund or replacement. Thank you!


Description

Viscosity LND-1 viscosity meter is the viscosity of the condition. This means that a certain amount of sample at certain temperatures and a certain aperture hole over time will flow in seconds.

The following formula can be converted to a sample flow time (second) to a dynamic viscosity value (mm2 / s).

Y = (t-6.0)/0.223(30s-100s)

Here, t-flow time (s), Y-dynamic viscosity (mm2/s)