This large diameter cleaner is perfect for large aquariums and commercial use. Use this water change tool when connected to a household hose, allowing you to quickly change the water while sucking out dirt in the gravel. It has a high emission, especially for large aquariums.
Cut the water hose (sold separately) within 3.3 ft (1 m) (shorter ones will be easier to breath) and connect to the professional cleaner body. Connect one end of the connected hose to the inside side of the suction pump. Set the hose on the drain side in a container such as a bucket prepared or drain area (drain). When this occurs, set the drainage side below the aquarium. Once the Pro Cleaner body is completely submerged into the aquarium, press the suction pump several times to start drainage. If water is not easy to flow, please put the outside side of the suction pump up to the outside side of the suction pump may flow smoothly. This product cannot be used in places where there is no gap between the drain and the drain (hose tip). The siphon type cleaner has a significantly lower water level (such as when installed on the floor), which makes it difficult to drain. In this case, please use electric cleaner or place the aquarium on the aquarium base to ensure a sufficient height