Product Description: W-3100 Tool Plate Included
This workstand allows you to lift and hold your bicycle from the floor (ground) and maintain maintenance while standing position.
Adjustable angle for easy working position
The legs are designed to be wider and stable even when you change the angle.
The clamp can hold pipes from 1.0 inch (25.4 mm) in diameter up to 2.6 inch (65 mm) in diameter, can be operated with both opening and closing with just one lever.
When not in use, you can simply lift the main unit to sump your legs and save space for storage.
Comes standard with a tool plate for storing parts and tools.
There are 24 holes and slots in the outer perimeter of the tool pane, so you can insert and hang tools.
Long tandem or long tail vehicles with wheelbase may break the balance and fall over.Place on a horizontal and flat floor.When you rotate the bicycle on the top, please hold the bike with your hand. If you put it in extreme forward or backward rise, it may cause it to fall over due to its balance and breakage.
All steel frames for stabilityThe 4.6 ft (1.41 m) tall post can be combined with two pipes (bottom) and a thin pipe (top).You can change the angle of the bicycle that you hold in place, so you can position the bicycle forward and carry the brake in front of your eyes when you are doing front brakes.
|
|
|
|
---|---|---|---|
1. Assembly.Use M8x40 bolts and M8 nuts to attach left and right legs to the lower posts.The direction of the lower post, make sure the hole of the post fixing bolt is at the back. |
2. ConfirmPlace the assembled bottom post on the floor and make sure the adjuster is ground at the same time without rattling.If there is something that floats up, loosen the lock nut, turn the adjuster to adjust the length to the ground, then re-tighten the lock nut to the leg with a 0.5 inch (13 mm) spanner. |
3.InstallationPass the clamp through the upper post, bite the gear and lever together and attach the flat washer and rear knob to the rear of the shaft.When the knob is tightened completely, the clamp will not rotate, so the tightening pressure is reduced to the degree of smooth rotation without rattling. |
4. FixedInsert the upper post into the lower post.Insert the upper post into the deep position and secure the post fixing bolt with a 0.2 inch (5 mm) hex wrench to prevent it from coming out. |
Developed a variety of products including working stands for roof carriers, bicycle assembly and adjustment, bottle cages, accessory accessories, exhibition fixtures, and 3 roller for training.In 1988, the fixed trainer developed the "MAGTURBO" which uses permanent magnets to acquire an international patent.After that, we pay attention to MAG method, we have made improvements based on feedback from markets and races, and now it has evolved into the "LiveRide Series" that is quiet and easy to handle.
Minoura W-3100 Work Stand, Steel | MINOURA RS-5000 Clamp Type Work Stand | |
---|---|---|
Customer Reviews |
4.0 out of 5 stars
126
|
3.5 out of 5 stars
41
|
Price | ¥17,191¥17,191 | — |
Installation Dimensions | Width 26.0 x Depth 23.6 inches (660 x | Width 1,000 mm x Depth 700 mm |
Clamp Height | 55.1 inches (1410 mm) (fixed) | 37.0 - 59.1 inches (940 - 1510 |
Clamp Compatible Dia. | 25.4 - 65mm | 25.4 - 65mm |
Load Limit | Up to 66.1 lbs (3 | 66.1 lbs (30 kg) (recommended up to 44.1 lbs ( |