■Product Features
GS1 Databar (formerly known as RSS). Supports 300 scans per second, scanning speed, minimum resolution 0.04 inch (0.1 mm) accuracy. Comfortable reading: 2.6 inches (65 mm). It can also read barcodes about 3.9 inches (100 mm) wide (depending on conditions). Free repair)
|
|
|
|
---|---|---|---|
Just plug it into a USB port. No driver requiredConnect the barcode reader to your computers USB port and youre ready to go.The barcode is "pop!" "When you read it, it will enter data into your computer just like input from a keyboard. |
Read MethodTouch barcode readers read at a distance or not contact barcode (If you need a separate reader, consider laser or long range barcode reader) 1. Press the trigger button inside the barcode reader to hit the reading light on the barcode.(At this point, hold the barcode reader to allow the barcode to enter the center as much as possible.) 2. When the reading is successful, it will make a "crack" and beep, the reading light will turn off. |
Read DataRead data is entered in the apps cell or cursor position as well as keyboard input. Please test reading with a notepad Please set the input mode on the computer as a "direct input" (half-angle key). This barcode reader default has a "Enter" after the barcodeYou can also change this to a "Tab" or a "non-stick specification. |
If you need to change the settingsIf you change the settings of a barcode reader, such as reading mode and transmitted data specifications, you can follow the instructions in the manual to read the configuration barcode. The manual is included with the product. |
Value Model | Thin High Spec | Energy saving high spec | Long range model. | |
---|---|---|---|---|
Dimensions (W x H) | 80 x 160mm | 3.1 x 6.2 inches (79 x 1 | 3.0 x 5.9 inches (75 x 1 | 2.7 x 4.0 x 5.7 inches (68 x 101 |
Cable | Straight 5 feet | Straight 4.9 ft (1.5 m) | Straight 6.6 ft (2.0 m) | Straight 5 feet |
Interface | USB 2.0 (USB Keyboard I/F) *Compatible with USB 3.0 | USB 2.0 (USB Keyboard I/F) *Compatible with USB 3.0 | USB 2.0 (USB Keyboard I/F) *Compatible with USB 3.0 | USB 1.1 (USB Keyboard I/F) *Compatible with USB 2.0/3.0 |
Read sensor | 1500 pixel CCD | 2500 pixel CCD | 2500 pixel CCD | 2500 pixel CCD |
Maximum read width (depending on conditions) | 80mm (touch 60mm) | 100mm (touch 80mm) | 100mm (touch 60mm) | |
Read distance (depending on conditions) | 0-50mm | 0-60mm | 0-65mm | 1.6 - 18.9 inches (40 - 480 mm) *Varies depending on the width of the |
Scan Speed | 200 scans per second | 200 scans per second | 300 scans per second | 300 scans per second |
Compatible OS | Widnows 7,8/8.1/10 (Other OS support USB HID) | Widnows 7,8/8.1/10 (Other OS support USB HID) | Widnows 7,8/8.1/10 (Other OS support USB HID) | Widnows 7,8/8.1/10 (Other OS support USB HID) |
GS1 DataBar | x | ○ (Read only/cannot be edited) | ○ (Read only/cannot be edited) | ○ (Read only/cannot be edited) |
Barcode on LCD screen | ○ | ○ | Serial No. A12*** and later | ○ |