[red]
[Pink]
[blue]
[light black]
[purple]
[blue (light)]
[transparent]
Change the color of your headlight lens by simply applying the headlight film (HEAD LIGHT FILM)
Just stick it to any desired location to change the look of your car.
3-layer construction protects against scratches during installation
Easy to cut with scissors or cutters.
3-layer construction
PROTECTOR/FILM BODY/REMOVAL PAPER - Protective film on the surface protects the film from scratches when carrying or installing
How to Apply
Measure the surface to be applied and cut 1.2 - 2.0 inches (3 - 5 cm). The large cutting surface makes it easy to straighten wrinkles and deflate.
Thoroughly wipe off dirt and oil from the surface to be applied. Leaving dirt left behind may cause peeling and floating.
Spray a little water on the adhesive sheet side of the film. At the same time, spray a small amount of water on the surface of the light.
Apply outside from the center of the film and use a spatula to escape.
Cut off excess film
Done!
Product Specifications
Material: PVC.
Product Size:30x120cm
Set Contents: Headlight film main unit
Note
Item color may vary due to different monitors.
Comes with protective film Always peel and use.
By applying the film, the amount of light will be reduced compared to the previous film installed.
By applying it with a hair dryer and applying it to the product, wrinkles and distortions will be removed and installed cleanly.
It is not easy to apply to a 3 curved surface, but if you gently smooth the wrinkles while warming it up, it can be applied well.
If overheated, film and objects may melt. Please be careful when working.
Please be aware that when applying spray liquid or water to the film with a spatula, etc., the moisture between the film and the lens will dry after air bubbles.
We cannot guarantee any damage during installation process.
If a car film is installed, it will not be able to perform vehicle inspection.