Feature(may vary by option.)

●Special Japanese CPP Thickness 100 Micron (0.1 mm) Extra Thick Hard Perfect Sleeve [Width 2.2 inches (55.5 mm) x Height 3.4 inches (87 mm)
●Perfect for protecting and using arcade game cards, board game cards and IC cards with 2.1 inches (54 mm) wide x 3.4 inches (86 mm)
●We are confident in the durability, fit, and slippery of our sleeves!
●Perfect for holding credit cards (2.1 x 3.4 inches (54 x 86 mm), commemorative certificates!

[50]





Description

Mr. Kizuzen, the arcade gamer of the game center has been looking for a perfect and hard card sleeve (plain transparent color). This is a custom-made sleeve produced in Japan. The outer dimensions of the sleeve are 2.2 inches (55.5 mm) wide x 3.4 inches (87 mm), making it the perfect size for those who do not lose the cards in the sleeve during play. While most of our compression sleeves are soft type of material that is less than 0.05 mm thick and are prone to tearing, these sleeves are extra thick 100 micron (0.1mm) thick and are perfect for intense card action games! Because the material is Polypropylene (CPP) so card ink wont transfer onto the sleeve like on-demand printing. The clarity of the CPP (non-stretching polypropylene) sleeve is slightly whiter and turbidity than OPP (2-axis stretched polypropylene) sleeve, but it has excellent heat resistance and tensile strength. (About cards compatible with sleeves) Supports arcade game cards, board game cards, commemorative horse tickets, drivers license, My number cards, and contact IC cards, etc. (Note about using the sleeve) This is a hard type sleeve that is the perfect size, so please slowly and carefully insert the card into the sleeve. If you put it in a momentum it may cause the cards to fold and bend. Please be careful. While we have strictly measured the size of this sleeve, the sleeve may shrink slightly depending on the manufacturing time, humidity, and temperature. If the individual sleeves are difficult to insert cards, please insert an IC card or other card that you want to break in the sleeve and protect it from the inside. In particular, when placing cards with holographic processes in the sleeves, the thickness of the hologram processing card has increased, so it is recommended that you put an IC card or other card you want to use it to protect it from the inside of the sleeve. These sleeves have a different slide on both sides. If you have trouble slipping too much, please toss the sleeve lightly like a menko and put it on the back of the card. If you are a game that moves the cards vigorously on the board, we recommend wiping them clean before play. Please make sure to measure the card you plan to put in this sleeve before purchasing.