Feature(may vary by option.)

●Cross thinning processing for good adhesion and no slipping: The special tip processing allows for speedy and accurate drilling. It also has reduced cutting resistance and reduces tool and battery consumption
●Worry-free Point 3: Japanese Company & High Quality Customer Support: We are a manufacturing company in Tokyo. In order to deliver high-quality products and services, Japanese staff will respond to you carefully and carefully
●(Spiral Groove Discharges Shavings Smoothly) The spiral groove quickly discharges debris during cutting, thus reducing processing resistance and ensuring high precision drilling and low wear
●(Cobalt High Speed Steel for Enhanced Heat Resistance and Abrasion Resistance) The addition of cobalt has improved heat resistance and rust resistance, making it a strong drill that can withstand harsh high-speed processing. Suitable for drilling holes in a wide range of materials, such as stainless steel
●(Various Drilling Processing in 1 Piece) The hole diameter is 0.16 - 0.57 inch (4 - 12 mm) intervals, and 0.16 - 0.8 inch (4 - 20 mm) intervals, allowing you to drill a variety of holes quickly without having to replace the bits. You can put it in your tool box for peace of mind
●Compatible with Impact Drills: Uses a standard 0.25 inch (6.35 mm) hexagonal shaft, which can be used with impact drills, impact drivers, etc. It can also be used with a regular keyless chuck or a chuck with keys
●High versatility and precision processing: Iron steel and aluminum are 0.08 inch (2 mm) and stainless steel are 0.04 inch (1 mm) for the thickness of the processing. Can be used with resin and wood up to 0.2 inch (5 mm) thick. 2 blades have a high precision finish for a clean hole section

[[3 sets] 4-12mm 9 steps]

[[2 sets] 4-12mm 9 steps]

[[5 sets] 4-12mm 9 steps]

[[2 sets] 4-20mm 9 steps]

[[3 sets] 4-20mm 9 steps]

[[3 sets] 4-12mm 9 stages + 4-20mm 9 stages 2 pieces set]

[[5 sets] 4-20mm 9 steps]

[[5 sets] 4 blades 4-20mm 9 steps]

[4-20mm 9 sections]

[4 blades 4-20mm 9 steps]

[[5 sets] 4-12mm 9 stages + 4-20mm 9 stages 2 pieces set]

[4-12mm9 segments]

[[3 sets] 4 blades 4-20mm 9 stages]

[4-12mm 9-segment + 4-20mm 9-segment 2 sets]

[[2 sets] 4-12mm 9 stages + 4-20mm 9 stages 2 pieces set]

[[2 sets] 4 blades 4-20mm 9 steps]

Description


Hole Plate Thickness: Thin steel plate, aluminum 0.08 inch (2 mm), stainless steel plate 0.04 inch (1 mm) (details) The diameter is printed with double blade specifications, suitable material for wood, stainless steel, steel plate, vinyl resin, etc.	Cross thinning process reduces wear and increases tool life.] The tip has excellent penetration for improved durability. It also reduces the resistance of the cutout so your tools will last longer.	Spiral Groove Scatters Shavings for Easy Positioning: The spiral grooves shatter off the shavings for easy positioning. Spiral groove with spiral groove prevents shavings from tangling and causing scratches.


(Cobalt High Speed material for excellent durability and long lasting use) Cobalt High is heat resistant and suitable for drilling a wide range of materials, including stainless steel.	[About Performance] Step specifications: Drilling is 0.04 inch (1 mm), 0.08 inch Step 9: Drilling Depth: 0.2 inch (5 mm) hexagonal shaft (0.25 mm) electric drill; Be sure to use cutting oil to avoid overheating, and take time for drilling at a low speed as possible. To avoid damage, please drill a hole with a punch, etc. before use.

Target Materials


Thin Steel Sheet Hole Plate Thickness: 0.1 inch (2 mm) Be sure to use cutting oil to avoid overheating, and take time to drill holes at a low speed as possible.	Aluminum Hole Plate Thickness: 0.1 inch (2 mm) Be sure to use cutting oil to avoid overheating, and take time to drill holes at a low speed as possible.	Stainless Steel Stainless steel plate 0.04 inch ( Be sure to use cutting oil to avoid overheating, and take time to drill holes at a low speed as possible.


Wood Hole Plate Thickness: 0.2 inches (5 mm)	Vinyl Resin Hole Plate Thickness: 0.2 inches (5 mm)	Plastic Hole Plate Thickness: 0.2 inches (5 mm)


	Hole Saw Set	Protective Glasses	Electric Screwdriver	Precision Screwdriver	Water-resistant paper
Description	[Applicable materials] Wood, iron plate (up to about 0.08 inch (2 mm) / used with cutting oil), aluminum plate (up to about 0.1 inch (3 mm) / combined with cutting oil), gypsum board (interior wall/ceiling material), plastic, etc.	(99% Transparency Goggles) 99% transparency is transparent, making it easy to see through, and water droplets wont get in the way of work. The anti-fog coating allows you to hear your perspective regardless of the distance.	(Electric and Manual Use) This product can be switched between electric and manual.280 rpm motor makes it quick for temporary tightening and tightening by hand and greatly increases the efficiency of screwing work.(Maximum tightening torque: 3 N / m / hand tightening torque: 10 N / m)
	Applications: For carpentry production, drilling holes in furniture and fixtures, drilling holes in interior walls and ceilings, drilling in metal plates, drilling holes in resin products, car interiors, drilling into wood floors, plumbing work, electrical work, etc.	Attention to the fit and stay in place even after extended periods of wear: This best-selling model is suitable for any face width. The nose part is also designed to fit the general purpose, so it stays in place even when wearing glasses.It is an overglass type that can be worn over your own glasses. Made of a lightweight material with polycarbonate, so it stays in place even when worn for long periods of time.	Includes 18 varieties of bits: Includes all tip tools, such as minus bits, plus bits (all 4 standard sizes from PH0 to PH3), posi drive, (used for assembling European products such as IKEA furniture, etc.), hexagon (hexagon), torx (hexagon), drill bits (for drilling).
	Material: The hole saw blade is made of thin and strong bi-metal material for speedy drilling.The center drill is made of HSS (High Speed Steel) material for high penetration, corrosion resistance, and abrasion resistance.	(Can be used for a variety of uses) Can be used for pollen, gardening, DIY projects, flying, picnics, DIY projects, polishing work, research, and other factories line work.	Compatible with various uses: The bits are easy to replace and compatible with bits with commercially available bits.All bits are long and can be easily drilled using the included drill bit.Tightening and loosening is intuitive at hand for all purposes.We do not recommend drilling holes in metal.
	Easy to Clean with Spring Center Drill: The center drill has a conical shape spring that allows you to easily remove the parts inside the hole saw after drilling.	Material: Polycarbonate Lens Width: 6.7 inches (17 cm); Height: 2.4 inches (6 cm); Width: 6.3 inches (16 cm).	Lightweight Design and Easy to Use: This electric screwdriver is super lightweight 5.6 oz (160 g).It is easy to handle even for women and elderly, and it is designed to prevent fatigue even when working for a long time.Adopts a spherical design that is easy to grip and slippery, so you can use it even when working.
	Compatible Electric Drills: Can be used with electric drills that support chuck diameter 0.4 inch (10 mm). (Compatible with keyless zipper or keyed zipperNot compatible with electric tools for 0.25 inch (6.35 mm) hexagonal shaft.)		USB Charging Method: Uses USB Micro-B to allow charging from a mobile battery or car charger.An AC adapter is also included, so you can easily charge it from an outlet.(Maximum charging time: 60 minutes; Maximum operating time: 50 minutes; Maximum operating time may vary depending on bits. )
			(Includes a dedicated case) Comes with a dedicated case for easy storage and carrying.Chargers and cables can also be stored in the case and ready to use when you need them.You can safely store your electric driver in the home or office without worrying about losing each part.

Hole Plate Thickness:

Cross thinning process reduces wear and increases tool life.]

Spiral Groove Scatters Shavings for Easy Positioning:

(Cobalt High Speed material for excellent durability and long lasting use)

[About Performance]

Target Materials

Thin Steel Sheet

Aluminum

Stainless Steel

Wood

Vinyl Resin

Plastic