Feature(may vary by option.)

●Adapters can be used with 7 types of holders including OLYMPUS, SAMYANG, SIGMA, SONY, ZEISS, Tamron HTII, and NIKON HT II
●The outer holder portion can be shared, and the adapter that tucks into the lens allows you to share the holder
●1 holder is designed to allow you to share many lenses
●If you use the adapter with 3.7 inches (95 mm), 3.4 inches (86 mm), 3.3 inches (82 mm), 3.0 inches (77 mm), you can share many lenses
●This product does not include a filter side holder, so if you do not have it, please purchase a product that is set with the filter side

[SIGMA 14-24mm f2.8 DG DN]




[SIGMA 14mm f1.8]




[TAMRON 15-30mm f2.8 HT150T1Ⅱ]




[ZEISS 15mm f2.8]




[SIGMA 14-24mm f2.8]




[SAMYANG 14mm F2.8 ED AS IF UMC]




[S_12-24mmF_8-16mm]




[NIKON NIKKOR 19mm f4 ED]




[OLYMPUS 7-14mm f2.8]




[SIGMA 12-24mm f4]




[NIKON 14-24mm f2.8 HT150N1 Ⅱ]




[SIGMA 20mm f1.4]





Description

This is a single adapter ring on the lens side for those who already have a HTIII / HTII 150mm holder set.Holder outer frame (filter mount) not included.HTIII / HTII 5.9 inch (150 mm) holder set and HTIII / HTII 5.9 inch (150 mm) holder outer frame (filter mounting); Includes case for single adapter ring.

How to use HTIII 150mm Filter Holder (common)

HTiii150adp_02HTiii150adp_02

HTiii150adp_03HTiii150adp_03

HTiii150adp_04HTiii150adp_04

1. Attach the lens side adapter to the lens

Loosen the retaining screw on the lens side adapter and insert it into the recessed position of the lens tip from the front of the lens to match the position of the fingernail inside the lens side adapter.Tighten the fixing screw firmly where the lens mirror body and the nail on the side of the adapter touched.

2. Attach the outer frame of the holder to the lens side adapter.

When you hook the outer edge of the lens side adapter on your lens to your fingernail on the outside of your holder, tuck the knob in the holder outer frame and push it into the adapter ring.

Spring integrates the lens end adapter and the outer rim.The outer frame can be rotated freely after fixing.

3. Mount the square filter

Insert the 150mm wide square filter into the slot of the outer frame of the holder.Insert the filter into the same slot on the left and right so that the filter side is parallel to the lens surface.

When shipping, you can use up to 2 sheets at the same time, but basically use them from the slot on the front side (lens side).

Because the urethane used for light shielding is attached to the outer frame of the holder, it will be harder than other slots.

Crab Filter KANI Filter HT3 HT150 Square Filter Crab Filter KANI Filter HT3 HT150 Square Filter Crab Filter KANI Filter HT3 HT150 Square Filter Crab Filter KANI Filter HT3 HT150 Square Filter Crab Filter KANI Filter HT3 HT150 Square Filter
HT150 III Outer Frame Holder + Adapter Ring Switch Holder Adapter Ring Set II Challenge Set, 5.9 inches (150 mm)
Overview Holder body to attach square filter only (adapter ring required to attach to lens) A set of adapter rings to attach to the holder body and lens. Square filter holder with individual angle adjustment (adapter ring required to attach to lens) A set of accessories for connecting parts between the holder body and the lens. Set includes a square filter with an adapter ring that attaches to the holder body and lens.
Holder body (outer frame) ○ ○ ○ - ○
Switch holder main unit - - ○ - -
HT150-95 Adapter Ring - ○ - ○ ○
For Step Up Ring 82mm - ○ - ○ ○
For Step-Up Ring 77mm - ○ - ○ ○
For Step-Up Ring 72mm - ○ - ○ ○
Frame CPL - - - - ○
P. Soft GND 0.9 - - - - ○