■Brand Introduction
Fairfield Circuitry offers a variety of unique, high quality effects from Canada and Quebec to the world.
The unique design is engraved in an unpainted housing that is simple yet laborous.
Beautiful pedals, unique but high quality sound pedals will never want to be near you.
■Product description
No matter what job you do, you need an accountant (the Accountant)
The signal chain is no exception. This little accountant will easily blend into the board without asking anything. Then you will start working quietly.
If you happen to tamper the numbers, mismagicize your book, and knock the numbers you need.
Of course, you should not do this in the real world, but it is very useful for voice signals.
Enjoy tonal dynamics control or apply strong compression.
Although it is a small pedal, the Accountant is a compressor that can be used with a variety of styles.
A compressor with a JFET all-analog circuit.
The Accountant can be used not only for guitars but also for all signal sources such as bass, vocals, synthesizers, etc.
Simple control interface, easy to set compression ratios and gains.
Compression
Compression is the dynamics form control effect.
This means that it adjusts between the loud and loud parts.
Often the first part of the signal (i.e., attack) is the highest volume and sets how much you want to decrease the volume just before distorting it.
Compression adjusts the transient to not too big, resulting in increased volume when entered into the amplifier, the whole signal is loud, more thick,
And depending on the intensity of the compression, it can add light distortion.
This is only done when the signal level exceeds the value.
This value is threshold
The Accountant threshold is fixed
PAD and RATIO controls set the action of compression.
The PAD simply attens the tone before being compressed. The loud signal has stronger compression, so you can set the flexibility of compression in the PAD setting.
RATIO chooses how much compression (compress) the louds part.
For example, in a 6:1 setting, if a signal above the threshold is 6 dB, it means compressed to 1dB.
This means you set the compression strength.
and volume control.
This is for adjusting the output level.
Does not affect compression effects.
How to use the Accountant?
The Accountant can be used in a variety of situations.
Here are some examples, but try different settings according to your use and style.
Light Compression (PAD:0, RATIO:0)
You may hear this type of compression in some cases that are virtually unaffected.
It will be a little bit of color but it is almost impossible to change the sound.
Use this setting for an entire tone of tune, or to create a familiar sound with other instruments.
Allows you to hear small play areas
Heavy Compression (PAD:2, RATOI:2)
This setting will help you know that there is compression.
When the effect is applied, the sound is obviously rich, and when combined with the distortion, the distortion becomes stronger.
You can also make the sound louder
Attacks and releases are also stronger, making it easier to play with the game.
Limiter (PAD:0, RATIO:2)
The limiter is a kind of compressor, but it is especially high and the ratios are set at a higher value than 10:1.
This setting allows you to emulate a limiter.
If you want to use it as a limiter, you can adjust the volume settings while actually making sound.
About Power Supply
The Accountant is made to fit standard center negative regulation 9-9.6V adapters.
Pedals are protected against reverse polarity. (It is designed to not work when connected to the center positive ones, but not to malfunction. )
But please make sure the power supply is suitable when using.
Does not use batteries.
Features:
True bypass
1/4" mono input / output jack.
Negative 0.08 inch (2.1 mm) DC Center
Mini size pedals 3.7 x 1.8 inches (94 x 45 mm).
Specifications:
Input Impedance: 1 MΩ
Output Impedance: <5 kΩ
Power Supply: 9 - 9.6 VDC
Current Draw: 12mA
Threshold: 50mV RMS
Attack Time: 5ms
Release Time: 500ms
This product is a Japanese distributor.
Please be aware that we cannot accept the agent warranty.
Reference price is the manufacturers estimated price at the time of the product release