Recommended for those who have hot water to increase their work efficiency.
Just turn on the power and the water temperature automatically adjusts to 154°F (70°C).
The main body (heater to wire) can be put into water.
Model Number: LH-TH70
Product Name: Boiling Heater (Temperature Fixed Type)
Voltage: 100V
Capacity: 1 KW
Current value: 10A
Weight: Approx. 19.4 oz (550
Product Size: 10.2 x 2.2 x 2.2 inches (260 x 55
Compatible Containers: Approx. 7.8 gal (30 L)
Control temperature range: 154°F (70°C±10°C).
Power cord: Approx. 6.6 ft (2 m) (uses tracking prevention outlet)
Heater Material: Stainless Steel, Safe Cover Included (Removable)
Red light illuminates when power is connected
Produce by Japan
Made in China, all domestically inspected
How to Use:
① Fill the bucket with water.
2. Put the entire heater into the water. (Be sure to put the wire at the end of the black resin box. )
3. Point to the outlet.
(After use)
4. Unplug the outlet.
5. Remove the heater body from the bucket.
6. Remove the cover from time to time and clean the heater surface.
It is recommended that you raise 5.6 gal (20 L) of water from 0 to 70 degrees Celsius (0 to 70 degrees Celsius).
Note:
While the heater is very convenient, it is very dangerous to cause fires.
Please gently unplug the outlet with your hand after use.
Remove the cover and wipe off the water droplets on the heater surface for a long time.
The temperature is fixed by the environment of the outside air and water flow.
When there is a lot of water, especially the temperature difference between the surface and the bottom of the thermo will be error.
Mix water, etc.
Please make sure to put the black box in water.
The temperature regulator inside the box is 154°F (70°C) off to 140°F (60°C).
(1. The red lamp is lit while the temperature is up to 70 degrees Celsius from water.
2. When the water temperature reaches about 70 degrees Celsius, it will automatically turn off and the red lamp will turn off.
3. When the temperature drops to 60 degrees Celsius, it will automatically turn on and the red light will turn on.
Repeat 2 and 3. )
If the black box is not in water, the temperature regulator will not work, so the water will boil.
The manufacturing plant ships tens of thousands of units per year to Europe and the United States, but it is most likely to be defective, empty firing (use in places without water) is the main cause of failure.
Empty firing is not guaranteed.
Insert the heater in water and turn the outlet out.
If the heater is broken, the surface of the heater will leave marks like metal burning. (Blackish Burnt Color)
Please stop using this product as it will leak electricity.
About the structure of the black resin box
Resin is poured into the parts where electricity passes through, making it completely waterproof.
There is a space inside the box (where electricity does not pass through), so water may come in when there is a gap between the wire and the base of the box lid.
After use, please put water out before storage.
If you have any questions, please feel free to contact us by email.