Feature
●4 in 1 PH meter: In addition to PH, EC, and temperature, TDS can be measured. PH Measurement Range: 0.00~14.00pH, EC Measurement Range: 0-999us/cm, TDS Measurement Range: 0-9990ppm, Temperature Measurement Range: 0.0-60.0℃/32-140℉ Adopts advanced electrodes to measure data at high speed and accuracy
●(Fast Measurement / High Precision) PH Measurement Range: 0.00 - 14.00 pH (resolution 0.01 pH), Measurement Accuracy: +0.1 pH. Adopts alloy probe for super sensitivity, and can measure water once in about 30 seconds. Adopts alloy probe for ultra sharp sensitivity and rapid measurement. Automatic calibration function and automatic temperature compensation, adjust according to water temperature and water quality to read more precise measurements. Please take out the batteries if you dont use them for a long time
●Easy to Operate, Japanese Instruction Manual: Press the power button, dip the electrode in the solution, shake it several times, and wait for a while, you can get the measurement values. When the value is stable, press the "HOLD" button to lock the measurement value, and there is no error. Equipped with a backlight function that can be used in dark places such as at night or indoors It also comes with an original Japanese instruction manual for easy use
●LCD Digital Display, Auto Auto Off Function: Adopts a large LCD display screen with PH, making it convenient to read and more accurate. LCD LCD LCD display, large and easy to read digital display at a glance. And the LCD screen is waterproof. Auto shut off after 5 minutes when not in use, save battery and extend service life
●Scope of application: This digital PH measuring device can be used for daily water safety inspection, as well as laboratories, industrial, aquatic cultivation, goldfish potted water, pool water, agriculture, gardening, etc
[Pink]
[Blue]
Description
PH Meter, 4 in 1 pH/EC/TDS/Temperature pH Meter 0.01 Resolution Precision Pen Type Tester, Water Quality Tester for Pool, Beverage Aquariums
Test water with this TDS and EC meter. Is your water pure drink? With a push of a button, the TDS water quality tester indicates the overall water purity level and appears in ppm on the screen. Our pens also display water conductivity levels (Electrical Conductivity (EC)) quickly. This means that the minerals (ions) in the water conduct electricity. Finally, you will see the level of water contamination and mineralization
Total Dissolved Solids (TDS) is measured as a million proportion (ppm). According to EPA secondary drinking water regulations, 500 ppm is recommended as the maximum amount of TDS drinking water. Measurements over 1000 ppm are TDS at a dangerous level. If the level exceeds 2000 ppm, the filtration system may not properly filter TDS.
Automatic Temperature Compensation: Both pH and TDS meter are equipped with automatic temperature compensation function according to the water temperature, so there is no need to worry about the temperature of the measuring liquid affecting the measurement results.
EC Parameter:
Range: 0 - 10,000 μS/cm, 10.01 - 19.99 mS/cm, 20.1 - 400.0 mS/cm (range is automatic conversion).
Resolution: 1μS/cm; 0.1mS/CM;
Accuracy: ±2% F.S.
TDS Parameter:
Range: 0 - 10,000 ppm, 10.1 - 200.0 ppt (range is automatic conversion).
Resolution: 1ppm; 0.1ppt
Accuracy: ±2% F.S.