Feature(may vary by option.)
●(Ultra Hardness Material) HSS-Co M35 steel beveled cutter is treated with AlTiN Titanium Nitride aluminum coating on the surface for HRC89. Outstanding sharpness than ordinary beveled drills. Reduces heat produced during friction. It has excellent abrasion resistance, heat resistance, and sharpness, and the titanium coated tap drill has high rust resistance
●Wide range of uses: Can be used for a variety of processing, such as chamfering stainless steel, thin iron plates, aluminum plates, wood, vinyl, resin, etc., and for cutting out holes in thin sheets, chamfering for countersunk screws, and deburring vacuum pipe chassis cases. A necessary tip tool for drilling screws in construction and electrical work
●Industrial Grade TiAIN Coating: The surface is reinforced by increasing the amount of aluminum content, TiAlN coating surface forms A1203 which forms a hard protective layer during drilling, improving the resistance of high temperature and grinding resistance, making it ideal for high-speed drilling
●Applications: For chamfering screw holes on wood, aluminum, and iron materials, deburring after chamfering and drilling pipes, and for use with iron, stainless steel, and non-ferrous metals. Can be used on acrylic plates. In addition, the shape of the shaft is hexagonal shaft, so it can be used with impact drivers, electric drills, and charging drills
●Product Specifications: Chamfering angle: 90° Material: Cobalt High Speed Steel (HSS-CO/M35), Hexagonal Shaft: 0.25 inches (6.35 mm), Surface Treatment: AlTiN Titanium Nitride Aluminum Coating
[5-10mm]
[10-15mm]
[1-4mm]
[2-5mm]
Description
Beveled Drill Features:
HSS-Co M35 Steel, Hardness: HRC89It has excellent abrasion resistance, heat resistance, and sharpness, and the titanium coated tap drill has high rust resistance.
- Product Name: Chamfer Drill
- Material: Cobalt High Speed Steel (HSS-Co/M35)
- Surface treatment: TiAlN titanium coating.
- Shank Diameter: 1/4 inch hex shank (0.25 mm)
Application Surfaces
Hole borders for stainless steel, iron, non-ferrous metals, etc.Can also be used on wood and acrylic plates.
How to use
Insert the hex shaft into the bit slot of the charging dryer.The zipper model is firmly secured with the handle. Please remove the handle.Firmly fix the workpiece and press the drill blade right angle against the piece.Please be careful that the thin drill blade may break if pressed hard.
Note:
Please read the instructions for the electric tools you use before using.Before use, please check if there are any abnormalities such as cracks or cracks.When putting on and removing the product, please do not connect electricity.Please use protective glasses when working.Please attach protective equipment according to your work content and location.The drill rotates at high speeds.Never touch your face or hands.Please remove any cut edges with a wire brush.Be sure to avoid impact when using an impact driver.Please do not modify or processing.Please do not use if it stops working.After use, please clean it well and keep it away from children.Please do not use for anything other than the intended purpose.
|
|
|
|
|
|---|---|---|---|---|
| Double blade step drill | Three-blade step drill | Four Blade Step Drill - Black | Four Blade Step Drill - Gold | |
| Blade Tip | Double blade | Three Blade | Four blades | Four blades |
|
|
|
|
|
|---|---|---|---|---|
| Tap Drill - Black | Tap Drill - Gold | Drill Bits, Set of 8 | Set of 3 Step Drills | |
| Blade Tip | Double blade | Double blade | Three Blade | Three Blade |