Feature

●Volume: 6.8 fl oz (200
●Contents Condition: Smooth liquid light blue transparent
●Container: PE container + push spray
●Ingredients: alkaline surfactant, alkylbenzene, organic solvents
●Accessories: Sponge (small), bamboo skewers x 1. *Towel not included

[200ml]





Description

P113-II from simple dirt to stubborn oil stains on the interior, leather seats, engine rooms, etc.P113-II from simple dirt to stubborn oil stains on the interior, leather seats, engine rooms, etc.

P113-II for removing various stains such as interior stains, grease around engines and kitchens.

The P113-II can handle a variety of dirt, car interior cigarette residue, stinker, drink spills, leather seat stains, engine room grease and more.

For easy stains, simply push a few to the towel and wipe it gently

For stubborn greasy stains, spray directly and rub with a sponge or brush.

The P113 comes in 3 different types, including the P113, P113-II, and P113-III (currently out of stock) so you can use them to clean out any unpleasant messes.

The P113 is for easy dirt removal, and the P113-II removes stubborn stains such as oil stains, and the P113-III is for removing dirt from FRP and aluminum panels in campers.

Supplied ready to use

P113-II (6.8 fl oz (200 ml) main unit.P113-II (6.8 fl oz (200 ml) main unit.
P113-II (6.8 fl oz (200 ml) accessoryP113-II (6.8 fl oz (200 ml) accessory

In addition to the P113-II main unit (navy blue label container), sponge and other accessories that can be used immediately

P113-II main unit.

200ml Push Spray Bottle

Square sponge

Used for rubbing with P113-II

Cleaning towel (Material: Cotton)

For wiping off floating dirt and drying with P113-II.

Bamboo skewers.

Wrap a towel to clean and finish gaps that are deep and difficult to get your fingers.

How to Use: Rub a small area carefully and wipe it off before drying.

Examples of use with P113-II • Steps 1-3Examples of use with P113-II • Steps 1-3
Examples of use with P113-II • Steps 4-6Examples of use with P113-II • Steps 4-6

The P113-II is a method of rubbing against dirt with a towel, sponge, brush, etc., and wiping off the dirt that floats along with the P113-II.

Example Usage 1 Car Handle:

Apply a small amount of P113-II to a towel, sponge, etc., and rub it on a small area and wipe it with a towel when the dirt floats before it dries out.

It will be dirty with a squid hand before finishing.Shake the container well and apply a small amount of P113-II to a sponge (or towel) and lightly press it to rub it on fine and light. Rub it in a fine vertical and horizontal circular manner to remove dirt clogged into the fine, uneven and unevenness and do not attempt to finish a large area at once, apply it every 3.9 - 7.9 inches (10 - 20 cm) square, and finally wipe it with a towel carefully. There is a clear difference between the unfinished parts.

[How to apply the P113-II]

Spray 1 to 2 times for push type and about 1/2 times for trigger type.

[About wiping towel]

As the towel gets dirty while you wipe it, you can change the face of the towel and prepare a separate towel for the one that is not enough for the included towel.

It is easy to install by having a towel to wipe off floating dirt with P113-II and two wiping towels on the finish

The finishing towel can be used as a dry towel, but the wiping towel can be used to clean and wring it out tightly.

[Wipe down narrow places where you cant find]

Use bamboo skewers (wrapped with a towel in bamboo skewers) to finish those areas that are not available.

(Examples of use): Can also be used for leather products such as sofas.

P113-II Usage Example 2 Sofa (Light Color)P113-II Usage Example 2 Sofa (Light Color)
P113-II Usage Example 3; Sofa (Dark Color)P113-II Usage Example 3; Sofa (Dark Color)

Can be used with genuine leather and synthetic leather.

《Example Usage 2 Sofa (light color)》

Use the same as the steering wheel above.

Comes with a stake or garment coloredApply a small amount of P113-II and scrub in small increments in a small area, then wipe with a towel.finished.There is a difference between the unfinished parts.

《Example Usage 3 Sofa (dark color)》

Exactly the same as light colored sofas.

Stubby and dog stains are visible.Apply a small amount of P113-II and scrub in small increments in a small area, then wipe with a towel.finished.There is a difference between the unfinished parts.

(Examples of Use) For oil stains and small items around the engine compartment.

Where to use P113-II materials: 1Where to use P113-II materials: 1
Where to use P113-II materials: 2.Where to use P113-II materials: 2.

It can be used to clean car interiors, around engines, and plastic materials.

Car interior (leather seats, handles, etc.), car engine surroundings, car ornaments (surface has been treated with pear-textured surface), car wheels (surface treated with pear) genuine leather and synthetic leather (light color, dark sofa, etc.), around objects (keyboards, etc.), shoes, bags (golf shoes, etc.) around the body (watch bands, accessories, etc.)

Warning:

If you try to finish a large area at once, there may be differences in parts that have not been cleaned and the appearance of speckles, so please make sure to carefully apply a small area with patience.Spray directly on the material may result in a spotless finish, so please use a sponge, towel or occasionally brush to finish it carefully.When the P113-II dries out, the floating dirt may reattach again, so please wipe it thoroughly before it dries out.

Product information