[Black]

This is the ICON model with the smoothest surface treatment of the STOMPGRIP series.
Less friction compared to regular VOLCANO grips for street riding.

How to apply the Stomp Grip:

1. Clean the surface where it is installed.
(When using clear, please remove dirt and limescale with a compound, etc. before working).

2. degrease the surface of the application

3. Positioning

4. Stick the edge to prevent air from entering. Peel off the backing paper while applying.
(Make sure to apply slowly by little bit by bit by step)

It takes 24 hours for the stomp grip to be stable.
72 hours required for full adhesion.
If used before full adhesion, it may peel or slide off.
Please pay special attention to the stomp grips that stick to the frame surface.

[Note]
The glue on the stomp grip is very strong.
If you remove the stomp grip forcefully, the paint may be damaged or peeled off.
To remove the stomp grip, please warm it with a heat gun or other similar to that of the stomp grip and decrease the adhesive strength before peeling off.