[clear]
[Black]
How to Apply Stomp Grips
1. Clean the surface where it is installed.
(When using clear, please remove dirt and limescale with a compound, etc. before working).
2. degrease the surface of the application
3. Positioning
4. Stick the edge to prevent air from entering. Please peel off the backing paper while sticking.
If you want to use clear, please put the time on the edge slowly by step to avoid air bubbles.
(If you apply the convex of the stomp grip one by one and squeeze out air bubbles so it can be applied cleanly.)
The Stomp Grip adhesive takes 24 hours for a stable adhesive.
72 hours required for full adhesion.
If used before full adhesion, it may peel or slide off.
Please be careful when using stomp grips that stick to the frame surface.
When driving a vehicle with stomp grip, please drive with clothing that does not touch your skin directly to the stomp grip.
If you drive with your skin directly in contact with your skin, you may experience injuries.
The glue used in the stomp grip is very strong.
If you remove the stomp grip forcefully it may damage the paint or peel.
(Special care must be taken on older vehicles or repainted vehicles depending on vehicle paint condition)
To remove the stomp grip, please heat it with a heat gun or other similar to reduce the adhesive strength before peeling off.