Feature
●For Airbrush Overhauling: Airbrush maintenance All-in-one Kit is a kit that includes everything you need to maintain your airbrush regularly. Includes specialty tools, special lubricants, sealants, cleaning tools, and the instruction manual (dedicated site) explains how to fully overholster the airbrush. With this kit, you will be able to perform your airbrush at your peak for years to come
●[Kit Contents] Needle gasket screw driver & air valve driver (1 piece), nozzle center tool, maintenance needle (with nozzle wrench), nozzle cleaning needle, cleaning brush 0.08 inch (2 mm), 0.1 inch (3 mm), nozzle sealant, high viscosity grease
●(Needle Seal Screw Driver & Air Valve Wrench) Update makes 2 pieces in 1 piece. The needle gasket screws inside the airbrush can be installed and removed without falling off. The best shape for removing screws that secure the air valve, and you can press the valve spring from the front, so you can install it without any stress
●Nozzle Center Tool: This tool can correct the misalignment of the center position when replacing the nozzle. This tool features an adjustable nozzle even when the nozzle is installed. Specifically, insert the tool into the groove between the nozzle and the main unit, and correct the roughly deviation according to the degree of falling, and fine-tune the center position by pushing
●Nozzle Cleaning Needle: Needle for cleaning the interior of the airbrush nozzle of 0.008 - 0.01 inch (0.2 - 0.3 mm). Cleaning Brush 0.1 inch (2,9 mm)): The most practical pipe brushes with 2 0.08 inch (2 mm) and 0.35 inch (9 mm). It is also compatible with fine holes
Description
Airbrush Maintenance All-in-One Kit
Kit Includes
Airbrush may cause paint leakage in the tail area if used for a long time.If paint leaks in the tail, the air will not stop first.In addition, it will cause secondary defects such as the trigger will not return or stop the paint from stopping.Airbrush problems are most caused by this failure and need to be fundamentally resolved.Airbrush Maintenance All-in-One KIt is a fundamental solution to airbrush problems and will last you for years to come.
Kit includes: needle washer screw screwdriver, air valve screwdriver, maintenance needle (with nozzle wrench), nozzle cleaning needle, cleaning brush 0.08 inch (2 mm), 0.35 inch (9 mm), nozzle sealant, high viscosity grease
|
|
|
|
|---|---|---|
Air Valve WrenchThis is a dedicated wrench for removing and removing air valve set screws. |
Needle washer screw driverDedicated screwdriver for removing and removing needle sealing screws.The tip is designed with a threaded screw, so the screws can be removed and removed without falling off. |
Maintenance NeedleIt can be used in a variety of situations, such as cleaning details of airbrushes, removing broken nozzles, etc.The cap part is a nozzle wrench. |
|
|
|
|
|---|---|---|
Nozzle Cleaning Needle, Cleaning Brush 2, 3mmThis cleaning brush is also compatible with cleaning needles to clean the inside of the nozzle and small holes in the small parts. |
High viscosity grease, nozzle sealantA high viscosity grease that increases the grease on the moving parts of the airbrush to smooth the movement, and a nozzle seal that prevents air back flow from the nozzle. |
User ManualUser manual can be viewed by reading the QR code on the back of the product. |
