The included mounting height adjustment block allows you to convert any 2.5-inch SATA drive to a 3.5-inch SATA hard drive with 0.37 inch (7 mm), 0.47 inch (9.5 mm), 0.6 inch (15 mm) thickness.
Conversion board less design Directly connect the 2.5" SATA HDD/SSD connectors to reduce transfer loss.
The product itself uses the same inch screw hole as a 3.5-inch hard drive, and it can be installed with special screws on the PC case mounter!
It converts to a 3.5-inch HDD size, so it can be used as a dedicated 3.5-inch HDD case.
Supported HDD/SSD: 0.37 inch (7 mm) / 0.37 inch (9.5 mm) / 0.6 inch (15 mm) thick HDD/SSD are not supported.
Compatible PC case: PC case with 3.5" drive bay.
When installing, it has a total of 3 points on the left and right side.
Cannot be installed on PC cases with screws from the bottom.
Product Contents: Nakakaku inner direct body, adjustment block (installed on the main unit) x 2, mm screws for fixing HDD/SSD x 2, mounting screws x 4.