Hakko Red Soldering Tip
[Use]
Red Replacement Soldering Iron Tip
Features:
Can be replaced with red soldering iron tips.
●長寿命·高耐久こて先。(銅こて先よりも長持)
●先端が一段細くなったこて先が付いている。電子工作用の細かいプリント基板などへのはんだ付けに適している
|
|
|
---|---|---|
Brand New ConditionIf you turn it on and leave it for more than 30 minutes, it will oxidize and lose the solder. |
When oxidation is rinsed and blackenedWhen left for 30 minutes *Tip temperature is 470°C (measured with HAKKO FG-100). Rinse oxidation to get black When in this condition, the solder will remain stuck even if it is brand new. |
How to deal withOnce the power is on, wait until the solder is melted, and send more solder.After that, even if you leave it unattended, you can maintain the wet spread as shown in the picture. |
HAKKO 500-T Hakko Red Series Replacement Soldering Tip | HAKKO Red Soldering Tip, 30 W, 501T | HAKKO 501ST-T Hakko Red Series Replacement Soldering Tip | HAKKO Red Soldering Tip, 40 W, 502T | HAKKO Red Soldering Tip 60W 503T | |
---|---|---|---|---|---|
Compatible soldering iron | 500 (RED) | FX-510(BLUE), 501(RED) | FX-510 (BLUE), 501 (RED), 501 ST(RED) | FX-511 (BLUE), 502 (RED), 515 (HOT KNIFE) | 503(RED) |
Dimensions | Φ3x65mm | Φ4x70mm | Taper Type: Tip Φ0.08 inch (2 mm) | Φ4x70mm | Φ6x85mm |